Filter
Top Products
NW-A605 / A607 / A608.GB.2-661-269-14(1)
77
77
Message Meaning Remedy
USB Connect
The player is connected to
a computer.
This is not a malfunction.
You can operate the
player using CONNECT
Player, but you cannot
operate the controls on the
player.
Icon animates from left
to right: Accesses to the
built-in flash memory is
in progress.
The player is accessing to
the built-in flash memory.
Wait until the access
completes. This message
is displayed when
transferring data to the
built-in flash memory or
formatting the player.
To delete abnormal data from the built-in flash memory
If “CANNOT PLAY,” “EXPIRED,” “FILE ERROR,” “FORMAT ERROR,”
“MG ERROR,” or “NO DATABASE” appears, there is a problem with all or
part of the data stored in the built-in flash memory.
Please follow the procedure below to erase data you cannot play.
1 Connect the player to the computer, and start CONNECT Player.
2 If you have already specified the data with problems, erase the
data using CONNECT Player.
3 If the problem persists, transfer all data without problems back to
the computer using CONNECT Player while the player is
connected to the computer.
4 Disconnect the player from the computer and then format the built-
in flash memory using the “Format” menu (
page 48).
Troubleshooting...Error Messages
Table of
Contents
Index
Menu