Sony D-EJ785 Portable CD Player User Manual


 
C
Portable CD Player
Sony Corporation ©2002
Operating Instructions
3-246-381-13 (1)
D-EJ785
English
WARNING
To prevent fire or shock hazard, do not expose the unit to
rain or moisture.
Do not install the appliance in a confined space, such as
a bookcase or built-in cabinet.
To prevent fire, do not cover the ventilation of the
apparatus with newspapers, tablecloths, curtains, etc. And
don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects filled
with liquids, such as vases, on the apparatus.
Certain countries may regulate disposal of the battery used
to power this product. Please consult with your local
authority.
CAUTION
INVISIBLE LASER RADIATION WHEN OPEN
DO NOT STARE INTO BEAM OR VIEW DIRECTLY
WITH OPTICAL INSTRUMENT
The validity of the CE marking is restricted to only those
countries where it is legally enforced, mainly in the
countries EEA (European Economic Area).
Power Sources
To use the AC power adaptor (C)
1 Connect the AC power adaptor to an AC outlet.
To use the batteries (B)
Use only the following batteries for your CD player:
Rechargeable batteries
Charge the rechargeable batteries before using them for
the first time.
NH-7WMAA
NH-WM2AA (NH-WMAA × 2)
Dry batteries
LR6 (size AA) alkaline batteries
To insert the batteries
1 Open the battery compartment lid inside your CD
player.
2 Insert two batteries by matching the 3 to the diagram
in the battery compartment and close the lid until it
clicks into place.
3 When using the rechargeable batteries, connect the
AC power adaptor to the DC IN 4.5 V jack of your
CD player and an AC outlet, then press CHARGE/x
to start charging.
The CD player charges the batteries. In the display on
the remote control, the indicator sections of
light up in succession. The CHARGE lamp on the CD
player turns on. When the batteries are completely
charged, the CHARGE lamp and
indicator get
turned off.
If you press CHARGE/x after the charge has already
been completed, the
indicator flashes and
“Full” appears in the display.
4 Disconnect the AC power adaptor.
Battery life* (approx. hours)
(When the CD player is used on a flat and stable place.)
Playing time varies depending on how the CD player is
used.
G-PROTECTION
on off
Two NH-7WMAA 15 10
(charged for
about 2 hours**)
NH-WM2AA 32 24
(charged for
about 4 hours**)
Two Sony alkaline 50 35
batteries LR6 (SG)
(produced in Japan)
* Measured value by the standard of JEITA (Japan
Electronics and Information Technology Industries
Association).
** Charging time varies depending on how the
rechargeable battery is used.s
CD player (front)/
to an AC outlet
i
i (headphones) jack
i
5HOLD
A
DC IN 4.5 V (external power
input) jack
4VOL +*/–
CD player (inside)/
Insert the # end first (for both
batteries).
#
Remote control/
Note
Use only the supplied remote control. You cannot operate
this CD player with the remote control supplied with other
CD players.
To check the remaining power of the
batteries
You can check it in the display.
Replace the batteries when “
” flashes.
t t t t
t Lo batt*
* Beep sounds.
Notes
The indicator sections of roughly shows the
remaining battery power. One section does not always
indicate one-fourth of the battery power.
Depending on operating conditions, the indicator
sections of may increase or decrease.
When to replace the rechargeable
batteries
If the battery life becomes shorter by about half, replace
the batteries with new rechargeable batteries.
Notes on the rechargeable batteries
To keep the original battery capacity for a long time,
charge the batteries only when they are completely
depleted.
If the battery is new or has not been used for a long
time, it may not be charged completely until you charge
and discharge it several times.
When carrying the rechargeable batteries, use the
supplied battery carrying case to prevent unexpected
heat. If the rechargeable batteries and the metallic
objects get contacted, heat or fire may occur due to a
short circuit.
Notes on using the dry batteries
Be sure to remove the AC power adaptor.
When the batteries are depleted, replace both batteries
with new ones.
Playing a CD
To insert a CD
1 Slide OPEN to open the lid (A).
2 Fit the CD to the pivot, then close the lid (D).
Notes
This CD player can play CD-Rs/CD-RWs recorded in
the Compact Disc Digital Audio (Audio CD) format,
but playback capability may vary depending on the
quality of the disc and the condition of the recording
device.
This product is designed to play back discs that conform to
the Compact Disc (CD) standard.
Recently, various music discs encoded with copyright
protection technologies are marketed by some record
companies. Please be aware that among those discs, there are
some that do not conform to the CD standard and may not be
playable by this product.
To operate the CD player
Button/Switch Function/Operation
1 Jog lever Press to start play. Press again to
u (play/pause) pause play.
To play from the first track, press
for 2 seconds or more while the CD
player is stopped.
2 Jog lever Flick toward . or > once to
./> find the beginning of the current/
(AMS*
1
/search) next track. Flick toward . or
> repeatedly to find the
beginning of the previous/
succeeding tracks. Hold toward
. or > to go backward/
forward quickly.
3 CHARGE/x (x) Press to stop playing.
(stop)
4 VOL+/– Press (turn for the remote control)
to adjust the volume.
5 HOLD Use to lock the controls on your
CD player or remote control to
prevent accidental button presses.
HOLD on the CD player works
only for the player, while HOLD
on the remote control works only
for the remote control.
The CHARGE lamp flashes if you
press any button when the HOLD
function is activated.
6 AVLS*
2
Set to “LIMIT” when you want to
keep down the maximum volume
to protect your hearing.
7 G-PROTECTION Protect against sound skipping.*
3
8 DISPLAY Press to display the remaining time/
tracks.
9 SOUND Use to emphasize the bass-boosted
sound. Press repeatedly to select
SOUND 1 or SOUND 2. SOUND 2
enhances more than SOUND 1.*
4
AC power adaptor
Display on the remote control
Play mode
AVLS
Remaining battery power
Sound mode
B
D E
12 Jog lever (u (play/
pause)•./> (AMS/
search))
u
. >
3CHARGE/x
CHARGE lamp
x
Headphones or earphones
Label side up
Button/Switch Function/Operation
q; P MODE/ Press repeatedly until the play
(play mode/repeat) mode you want appears in the
display.
No indication: Normal play
“1”: Single play
“SHUF”: Shuffle play
”: Bookmark track play
“PGM”: PGM (program) play
To repeat the play mode you
selected, press and hold until “
appears.
*
1
AMS = Automatic Music Sensor
*
2
AVLS = Automatic Volume Limiter System
*
3
Sound may skip:
if the CD player receives stronger continuous shock than
expected,
if a dirty or scratched CD is played or
when using poor-quality CD-Rs/CD-RWs or if there is a
problem with the recording device or application software.
*
4
If the sound is distorted when using the SOUND function,
turn down the volume.
To remove the CD
Remove the CD while pressing the pivot (E).
To turn off the operation beep
sound
You can turn off the beep sound that is heard from your
headphones/earphones when you operate your CD player.
1 Remove the power source (AC power adaptor,
rechargeable batteries or dry batteries) from the CD
player.
2 Connect the power source while pressing
CHARGE/x on the CD player or x on the remote
control.
To turn on the beep sound
Remove the power source and then connect the power
source without pressing CHARGE/x or x.
Open the battery
compartment lid.
*The button has a tactile dot.
*
LINE OUT jack
Strap holes
“WALKMAN” is a registered trademark of Sony Corporation to represent Headphone Stereo
products.
is a trademark of Sony Corporation.
Display
12 Jog lever (u
(play/pause)•ENT
(enter) • ./>
(AMS/search))
u
. >
Clip
Track number
Playing time
DC IN 4.5V
Printed on 100 % recycled paper
using VOC (Volatile Organic
Compound)-free vegetable oil
based ink.
C
1
B
×
1
2 3
3
x
x
4
**
**
*
**
t t t t
t Lo batt*
*
1 A
2 D
1 u
2 . >
. >
*
. >
.
>
3 x x
4 +/–
5
6 *
7 *
8
9
*
q;
*
*
*
*
E
1
2 x x
x x
OPEN
6 AVLS
7 G-PROTECTION
4VOL +/–
3x
9SOUND
q;P MODE/
8DISPLAY
5HOLD