Open as PDF
Controlling the TV
You can control your TV using the buttons
Using the number buttons for controlling
When you set the remote to the TV mode, you
can use the number buttons for controlling the
Press the TV button.
The TV button turns red and the remote is set to
the TV mode. You can select the TV channels by
using the number buttons.
>10 is for selecting the channel number greater
To cancel the TV mode, press the TV button
• Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
• The TV button turns off when you do not operate the
remote for 10 seconds.
Depending on the TV manufacture, the following
method also works. Press >10, then the number. (For
example, for channel 25, press >10, then 2 and 5.)
You can use VCRs or other units connected to
the VIDEO 1 or VIDEO 2 jacks. Refer to the
operation manual supplied with the unit for
further information on the operation.
Press FUNCTION repeatedly until VIDEO 1
or VIDEO 2 that you connected the unit to
appears in the front panel display.
Each time you press FUNCTION, the mode of
the system changes in the following sequence.
DVD t VIDEO 1 t VIDEO 2 t TUNER
(FM or AM) t DVD...
By pressing You can
TV [/1 Turn the TV on or off.
TV/VIDEO Switch the TV’s input source
between the TV and other input
TV VOL +/– Adjust the TV volume.
TV CH +/– Select the TV channel.
Using the Video or Other