Open as PDF
If a DVD is recorded with multilingual tracks,
you can select the language you want while
playing the DVD.
If the DVD is recorded in multiple audio formats
(PCM, Dolby Digital, MPEG audio, or DTS),
you can select the audio format you want while
playing the DVD.
With stereo CDs, VIDEO CDs or MP3, you can
select the sound from the right or left channel
and listen to the sound of the selected channel
through both the right and left speakers (in this
case, the sound loses its stereo effect). For
example, when playing a disc containing a song
with the vocals on the right channel and the
instruments on the left channel, you can select
the left channel and hear only the instruments
from both speakers.
1 Press DVD DISPLAY during playback.
The Control Menu is displayed.
2 Press X/x to select (AUDIO),
then press ENTER or c.
The options for AUDIO appear.
3 Press X/x to select the desired audio
x When playing a DVD
Depending on the DVD, the choice of
When 4 digits are displayed, they represent
the language code. Refer to the language
code list on page 87 to see which language
the code represents. When the same
language is displayed two or more times,
the DVD is recorded in multiple audio
x When playing a VIDEO CD, CD, or
The default setting is underlined.
: The standard stereo sound
• 1/L: The sound of the left channel
• 2/R: The sound of the right channel
x When playing a Super Audio CD
In stop mode, depending on the Super
Audio CD, the choice of settings varies.
• MULTI: The disc has a multi-channel
• 2CH: The disc has a 2 channel
• CD: When you want to play the disc as
a conventional CD.
Not all discs give you the three choices above
when in Super Audio CD playback. It all depends
on the layer configuration of the Super Audio CD
to be played.
4 Press ENTER.
Changing the Sound
1 : 3 2 : 5 5