Filter
Top Products
Series 7
SR7
SR7
Versatile Wall-mount Surround
Select for Diffuse or Direct Operation
The SR7 is a high-performance, wall-mount, surround speaker
with a selectable radiation pattern. Like most Snell surrounds
it can be used as a diffuse dispersion dipole or a wide dispersion
monopole. In the diffuse mode, the SR7 directs its energy away
from the listening area, performing like an array of movie
theater surround speakers. This creates a diffuse, lifelike
ambient soundfield. In the direct mode the SR7 functions
as a wide dispersion direct radiator, perfect for localized
surround effects.
Beautifully made and styled to match Snell’s
Series 7 line of in-room speakers,
the SR7’s shallow cabinet
houses a 5 1/4-inch long throw woofer mounted under a 1-inch
cloth dome tweeter. This tweeter is in operation in the
“Direct” mode. In the “Diffuse” mode, the side mounted
2 1/2
inch tweeters replace the front tweeter. Most system
designers
specify three or four surrounds, diffuse speakers for
side surrounds and direct speakers for rear surrounds.
The SR7 is designed for both. Voiced to match all Snell
speakers, it mounts easily and virtually disappears on the wall.
Design Acoustic Suspension, Multi-Pattern, On-Wall Surround
Frequency Response
80Hz-20kHz+3dB (80Hz-15kHz+3dB, "Diffuse" mode)
Sensitivity 89dB
Nominal Impedance 6 Ohms
Crossover Frequency 2.5kHz
Recommended Amplifier Power 20-150Watts
Maximum Output (per pair) 102dB
Placement Wall-Mount
Input Connection 5-way Binding Post, Accepts 12 Gauge Wire
Drive Units Tweeter: 1-inch Cloth Dome (Direct)
Tweeter: Two 2.5-inch Cone (Diffuse)
Woofer: 5.25-inch Poly, 5mm Excursion
Dimensions Height: 11.75-inches
Width: 10.38-inches
Depth: 5.63-inches
Grille: White or Black Perforated Metal 53% Open
End Caps: Solid Aluminum Plate, White or Black
Can be Custom Painted to Match any Décor
Manufactured by Snell Acoustics, PO 3717, Peabody MA 01960
www.snellacoustics.com 978-538-6262 978-538-6266fax