Filter
Top Products
English - 41
System Setup
■
If the P.SCAN button on the HDD & DVD
RECORDER’s front panel is pressed
during playback, the message “This
function is possible only on stop mode”
appears on the screen.
■
Progressive setting is only available when
the HDD & DVD RECORDER is in stop
mode.
NOTE
3
The message “Video Output Mode Progressive
Scan” will appear.
Video Output Mode
Progressive Scan
Setting up the
Progressive scan
1
With the unit in Stop mode, press the P.SCAN button
on the front of the HDD & DVD RECORDER.
The message “Press [Yes] to confirm Progressive
scan mode. Otherwise, press [No].” will appear.
Press the
œ √ buttons to select Yes, and then
press the
ENTER button.
2
The message “Please, set your TV to Progressive
input. To deactivate, press [STOP] key.” will
appear. Press the
ENTER button.
If the TV supports Progressive Scan, press the P.SCAN
button on the front of the HDD & DVD RECORDER to
enjoy. If you select ‘progressive’, the component cable
has to be connected at first.
(See page 22)
Press [Yes] to confirm Progressive scan mode.
Otherwise, press [No].
Yes No
Please, set your TV to Progressive input,
To deactivate, press [STOP] key.
OK
3-HR720-XAC_26-44_SETUP 5/17/05 9:55 PM Page 41