Filter
Top Products
English - 25
Connecting & Setting up
■
After the current time is set automatically,
the recorder will perform Auto Channel
Memory for about 3 minutes. If power is
on, while Auto Channel Memory is in
process, Auto Channel Memory will stop.
In this case, do Auto Channel Memory
from MENU (See page 30).
NOTE
Method 2 : Connecting a
Camcorder to the AV 2 IN jacks
You can also use the AV 2 IN jacks on the front panel of
the HDD & DVD RECORDER. You can record from
connected equipment, such as a camcorder.
When an input source is inserted into AV 2 while
viewing TV, the input will be switched to AV 2
automatically. If the input is not selected automatically,
use
INPUT button to select proper input.
Method 3 : Connecting a
Camcorder to the DV IN jack
If your camcorder has a DV output jack, connect it to
the DV input jack of your HDD & DVD RECORDER.
Step 5 : Connecting the
Power Cord
After all connections are complete, plug the power cord
in the wall outlet.
“Auto” appears in the panel display. This means
that the current time is being set automatically
(Auto Program) through the antenna under
connection and also the channel is being set.
The setup may take a few minutes.
When the HDD & DVD RECORDER operates normally,
the current time is automatically set and displayed in
the front panel display.
2-HR720_XAC_18-25_CONNECT 5/17/05 9:52 PM Page 25