Samsung DA FM60C Portable Speaker User Manual


 
5English
TROUBLESHOOTING
Before requesting service, please try the following solutions:
The unit will not turn on.
Connect the power plug to the outlet.
Your player will not turn on if the battery is
completely drained. Recharge the battery
and turn the player on again.
Check if the battery is discharged.
A function does not work when the button
is pressed.
Disconnect the power plug and connect it
again.
Check if the buttons correspond to the
functions you want to activate.
Sound is not produced.
Make sure the unit is properly connected.
Check if the Mute function is on.
Check if the volume is set to minimum.
The power of the unit is off.
The unit automatically turns off in the
following situations.
- If there is no KEY input for 8 hours when
the cable is connected in AUX mode.
- If the AUX cable in AUX mode is
disconnected for 25 minutes.
- If the Bluetooth or SoundShare mode
has been disconnected from this unit for
25 minutes.
- It does not turn off when the smart
phone is charging.
Sound is not produced in AUX mode.
Check the power of the external device and
whether the music is playing or not.
Make sure the AUX mode is selected.
Check if the audio cable is connected
properly.
Turn up the volume of the product/external
device.
The SoundShare (TV pairing) failed.
Check whether your TV supports
SoundShare. (http://www.samsung.com)
Check whether your TV has the latest
rmware.
Reset the unit.
If the function doesn't work even though
the connection is completed, contact the
Samsung call center.
The Wireless Audio Portable may not search
or connect properly in the following cases.
If there is a strong electrical eld around
the Wireless Audio Portable.
If several Bluetooth devices are simultaneously
paired to the Wireless Audio Portable.
If the Bluetooth device is turned off, not in
place, or malfunctions.
OTHER NOTES
About the Battery
If the battery is nearly discharged, red indicator begins to blink and eventually
turned off.
If the battery has insufcient charges, pressing the power button does not turn
on the product. Instead, the battery indicator blinks red a few times and turns off.
While the battery indicator is blinking, all other buttons will not work.
If the battery is fully discharged, all function, volume and bass settings are initialized.
About NFC
NFC tagging for Bluetooth connection cannot be established while powering on and off.
NFC tagging for Bluetooth connection will not work while the battery indicator is blinking.
About Automatic Bluetooth Connection
When switching to Bluetooth mode or powered up in Bluetooth mode, the last Bluetooth
connection will be restored automatically if available. Automatic Bluetooth connection
attempt will abort after 1 minute.
Within the automatic connection trial, connection to another Bluetooth device can be
limited. To connect to a different Bluetooth device, switch the product’s Bluetooth mode to
pairing mode. (See page 3.)
SPECIFICATIONS
Model name : DA-F60/DA-FM60C
Power supply : DC 14V 2.5A
Power consumption : 23W
Weight : 2.42 Ibs
Dimensions (W x D x H) :
8.8 x 1.8 x 5.2 inches
Operating temperature range :
+41°F to +95°F
Operating humidity range : 10 % to 75 %
- Samsung Electronics Co., Ltd reserves the right to change the specications without notice.
- Weight and dimensions are approximate.
Copyright
©2013 Samsung Electronics Co.,Ltd.
All rights reserved; no part or whole of this user’s manual may be reproduced or copied without the
prior written permission of Samsung Electronics Co.,Ltd.
Open the rear cover to check the label.-