RCA RS22162 Stereo System User Manual


 
- 8 -
- 5 -
- 4 -
- 7 -
- 2 - - 3 -
- 6 -
This product contains a low power laser
device.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is intended to
alert the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure that
may be of sufcient magnitude to
constitute a risk of electric shock
to persons.
The exclamation point within
an equilateral triangle is
intended to alert the user to the
presence of important operating
and maintenance (servicing)
instructions in this owner’s
manual.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
The following marks and symbols are located on the back of the unit.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including
ampliers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not t into your AC power outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the AC power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specied by the manufacturer.
Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of
time.
Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as the AC power cord or plug is
damaged, liquid has spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been
dropped.
IMPORTANT SAFETY INSTRUCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Portable Cart Warning
FCC INFORMATION
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an AC power outlet that is on a circuit different from the
one the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warnings: Changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Follow the advice below for safe and appropriate operations.
ON PLACEMENT
Do not use the unit in places which are extremely hot ,cold ,dusty, or humid.
Place the unit on a at and even surface.
Do not restrict the air ow of the unit by placing it in a place with poor air ow, by cover-
ing it with a cloth, or by placing it on a carpet.
ON SAFETY
Before operating, make sure that the rated voltage of the AC adapter matches your
local voltage.
When you are not going to use the unit for a long period of time, disconnect the AC
adapter.
ON CONDENSATION
When left in a heated room where it is warm and damp, water droplets or condensation
may form inside the CD player.
When there is condensation inside the unit, the unit may not function normally.
Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room
and allow the unit to dry before use.
2. USING THE AC ADAPTER
Before use, make sure that the rated voltage of your AC adapter matches your local
voltage. Make sure both speakers are connected correctly before plugging the AC
adapter cord into the AC power outlet.
1. CONNECTING THE SPEAKERS
Connect the wires to the speaker terminals.
Note: Connecting speakers other than the speakers supplied with the unit, may
damage the unit.
AC adapter
To AC Power Outlet
1. CD Door
2.
SKIP/SEARCH Buttons
3.
REPEAT Button
4. POWER Indicator
5. REPEAT Indicators
(ONE SONG / ONE DISC / ALL
DISC)
6. CD Display
7. FUNCTION Selector
(OFF/TUNER/AUX/CD)
8.
PHONES Jack
9. TUNING Control
10. VOLUME Control
11.
DISC SKIP Button
12.
STOP Button
13.
PLAY/PAUSE Button
14. Remote Sensor
15. Dial Scale
16. BAND Selector (AM/FM)
17. AUX IN Indicator
18. AUX IN Cable
1. Slide the FUNCTION selector to
TUNER.
The POWER indicator lights up.
2. Slide the BAND selector to desired
band (AM/FM).
3. Tune into a station.
4. Adjust the volume level.
NOTE: DO NOT CONNECT TO AN OUTSIDE ANTENNA.
Fully unwind the wire antenna. Then
extend the wire antenna and place it in
the position that sounds best.
(When the FM broadcast signal is strong,
it can receive FM Stereo Broadcast.)
Rotate the unit to get the best receiving
position.
AFTER LISTENING
Slide the FUNCTION selector to OFF.
FOR BETTER RECEPTION
- TUNING +
- VOLUME +
The symbol for Class
(Double lnsulation)
3. CONNECTING WITH OTHER OPTIONAL EQUIPMENT
Built-in
AUXcable
Audio
Equipment
1) Connect the AC adapter to the
AC power outlet.
2) Slide the FUNCTION selector
to the AUX position. The
AUX IN indicator lights up.
3) Turn on your audio equipment
and play the external source.
Listening to the Audio Signals from the
External Equipment
Storing the Built-in AUX Cable
1) Place the built-in AUX cable
inside the tray.
2) Gently push the tray door up
until it is closed.
RADIO OPERATION
PRECAUTIONSSAFETY PRECAUTIONS
LOCATION OF CONTROLSSYSTEM CONNECTIONSSYSTEM CONNECTIONS
USER MANUAL
RS22162 S
It's important to read this instruction prior to using your new product for the rst time.
Warnings
• The apparatus shall not be exposed to dripping or splashing and that no objects lled with
liquids, such as vases, shall be placed on apparatus.
• The AC adapter is used as disconnect device and it should remain readily operable during
intended used. In order to disconnect the apparatus from the mains completely, the AC adapter
should be disconnected from the mains socket outlet completely.
• Minimum 10 cm (4 inches) distances around the apparatus for sufcient ventilation.
• Batteries shall not be exposed to excessive heat such as sunshine, re or the like.
• Do not restrict the airow of the unit by placing it in a place with poor airow, by covering it
with a cloth, or by placing it on carpeting.
• No naked ame sources such as lighted candles should be placed on the apparatus.