Filter
Top Products
Washington
Oregon
Arizona
New Mexico
Texas
Oklahoma
Kansas
Colorado
Utah
Nevada
California
Idaho
Montana
North Dakota
Nebraska
Minnesota
Iowa
Missouri
Arkansas
Mississippi
Alabama
Louisiana
Florida
Georgia
Wisconsin
Illinois
Indiana
Ohio
Michigan
New Jersey
New York
Conn.
R.I.
Mass.
N.H.
Maine
Wyoming
Pennsylvania
Virginia
Virginia
West
Delaware
Md.
Vt.
Carolina
North Carolina
South
Olympia
Boise
Helena
Salt Lake City
Pierre
Cheyenne
Lincoln
St. Paul
Des Moines
Madison
Lansing
Harrisburg
Tre n t on
Providence
Hartford
Concord
Albany
Montpelier
Augus ta
Carson City
Phoenix
Santa Fe
Denver
Oklahoma City
Austin
Jefferson City
Little Rock
Jackson
Springfield
Indianapolis
Montgomery
Columbus
Charleston
Columbia
Atlanta
Richmond
Raleigh
Annapolis
Boston
Washington, D.C.
Top e k a
New York
Chicago
Miami
Philadelphia
Detroit
Houston
Dallas
Seattle
Las Vegas
Los Angeles
San Francisco
Sacramento
Memphis
New Orleans
St. Louis
Baton
Rouge
Salem
Bismarck
South Dakota
Tennessee
Kentucky
Nashville
Frankfort
Pacific
Mountain
Central Eastern
Summer
Winter
Winnipeg
Saskatoon
Regina
Yukon
Territory
Alberta
Saskatchewan
Manitoba
Ontario
British
Columbia
Quebec
Newfoundland
Northwest Territories
Nunavut
Pacific
Mountain
Central Eastern
Summer Winter
• Use only with the cart,
stand, tripod, bracket,
or table specifi ed by
the manufacturer, or
sold with the apparatus.
When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from
tip-over.
• Unplug this apparatus during
lightning storms or when unused
for long periods of time.
• Refer all servicing to qualifi ed
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such
as power-supply cord or plug is
damaged, liquid has been spilled
or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
• ADDITIONAL SAFETY INFORMATION
• Apparatus shall not be exposed to
dripping or splashing and no objects
fi lled with liquids, such as vases,
shall be placed on the apparatus.
• Always leave suffi cient space around
the product for ventilation. Do
not place product in or on a bed,
rug, in a bookcase or cabinet that
may prevent air fl ow through vent
openings.
• Do not place lighted candles,
cigarettes, cigars, etc. on the
product.
be played whenever the iPod
mode is selected but without
the corresponding device
connected.
OR
• If an auxiliary player (e.g. mp3
player) is connected, press AUX
to select listening to it.
3. Select a radio station as usual,
OR
Press iPod and then press /
to select a fi le on the iPod.
Playback will be in repeat all
fi les mode automatically.
OR
Start playback on your
auxiliary player.
• Press SLEEP once to check the
remaining sleep time. Press
SLEEP repeatedly to select
another sleep time.
• If you decide to turn off the
unit sooner, press SNOOZE,
OFF or press SLEEP repeatedly
to select “OFF”.
• When the sleep mode is
activated again, the sleep time
will be the same as the one
you have set before.
Waking to RADIO (
)
3. Select a desired wake up radio
channel (refer to “Listening
to the radio”). If no wake
up channel is set, your last
listening radio station will be
selected.
4. Adjust the volume to your
desired level.
5. Press OFF to turn off the unit.
Waking to iPod (
)
3. Adjust the volume to your
desired level. The last played
fi le on the iPod will be played
when the wake function
activates.
4. Press OFF to turn off the unit.
Note: If there is no iPod
connected, the alarm tone will
sound instead even if Waking to
iPod mode is selected.
user manual
manual de usuario
EN/E
It is important to read this user manual prior to using your new product for the fi rst time.
Es importante leer este manual antes de usar por vez primera su equipo.
RP5510i
RP5512i
v11.0 (EN/E)
FCC information
This device complies with Part
15 of the FCC Rules. Operation
is subject to the following two
conditions: (1) This device may not
cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause
undesired operation.
This equipment has been tested
and found to comply with the
limits for a Class B digital device,
pursuant to Part 15 of FCC Rules.
These limits are designed to
provide reasonable protection
against harmful interference in
a residential installation. This
equipment generates, uses, and
can radiate radio frequency
energy and, if not installed
and used in accordance with
the instructions, may cause
harmful interference to radio
communications.
However, there is no guarantee
that interference will not occur
in a particular installation. If
this equipment does cause
harmful interference to radio or
television reception, which can
be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of
the following measures
For your records
In the event that service should be
required, you may need the model
number and the serial number. In
the space below, record the date
and place of purchase and the
serial number:
Model No.:
Date of Purchase:
Place of Purchase:
Serial No.:
• Reorient or relocate the
receiving antenna.
• Increase the separation between
the equipment and receiver.
• Connect the equipment into
an outlet on a circuit different
from that to which the receiver
is connected.
• Consult the dealer or an
experienced radio/TV technician
for help.
Changes or modifi cations not
expressly approved by the party
responsible for compliance could
void the user’s authority to operate
the equipment.
Technical information
Product: Clock Radio
Brand: RCA
Model: RP5510i, RP5512i
Electrical consumption
External AC/DC adaptor
Input: 100-240 V ~ 50/60 Hz 0.7 A
Output: 10 V
1.4 A
The AC/DC Adaptor supplied with
this product is intended to be
correctly orientated in a vertical or
fl oor mount position.
Service information
This product should be serviced
only by those specially trained in
appropriate servicing techniques.
For instructions on how to obtain
service, refer to the warranty
included in this user manual.
The descriptions and characteristics in
this owner’s manual are for the purpose
of general reference only and not as a
guarantee. In order to provide you with
the highest quality product, we may
make changes or modifi cations without
prior notice. The English version serves
as the fi nal reference on all product
and operational details should any
discrepancies arise in other languages.
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONS
Before you begin
General controls
Clock
Canadian time zones
US time zones
Radio iPod
Wake function
Some of the following information may
not apply to your particular product;
however, as with any electronic product,
precautions should be observed during
handling and use.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near
water.
• Clean only with dry cloth.
• Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
• Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifi ers) that produce heat.
• Do not defeat the safety purpose
of the polarized or grounding-type
plug. A polarized plug has two
blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong is provided for your safety. If
the provided plug does not fi t into
your outlet, consult an electrician
for replacement of the obsolete
outlet.
• Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
• Only use attachments/accessories
specifi ed by the manufacturer.
• Connect power cord only to AC
power source as marked on the
product.
• Care should be taken so that objects
do not fall into the product.
• Do not attempt to disassemble
the cabinet. This product does
not contain customer serviceable
components.
• IF YOUR PRODUCT OPERATES
ON BATTERIES,
adhere to the
following precautions:
A. Any battery may leak electrolyte
if mixed with a different battery
type, if inserted incorrectly, or if all
batteries are not replaced at the
same time.
B. Any battery may leak electrolyte
or explode if disposed of in fi re
or an attempt is made to charge
a battery not intended to be
recharged.
C. Discard leaky batteries
immediately. Leaking batteries can
cause skin burns or other personal
injury. When discarding batteries,
be sure to dispose of them in
the proper manner, according to
your state/provincial and local
regulations.
D. Do not expose batteries to
excessive heat (for example, by
leaving them in sunlight or close to
fi re).
WARNING: TO PREVENT FIRE OR ELECTRICAL
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
iPod is a trademark of Apple
Computer, Inc., registered in the
U.S. and other countries.
Plugging in for power
Insert the connector of the AC/DC
adpater to the power jack at the
bottom of the unit.
External AC/DC adaptor input
power supply: 100-240 V ~ 50/60 Hz
Power is fed to the unit even when
it is not functioning. To cut the
power supply off, the power cable
must be unplugged.
Battery back-up operation
This clock radio is equipped with
a memory holding system that
can be powered with 2 “AA”
batteries (included). The power
failure protection circuit will not
operate unless battery is installed.
When normal household power
is interrupted, or AC line cord
is unplugged, the batteries will
power the clock radio to keep
track of time and alarm settings
programmed into memory. When
the battery backup functions,
the digital display will not light,
however, the function of alarm
still occurs during the power
interruption if remaining battery
power is adequate. Normal
operation will resume after AC
power is restored so you will not
have to reset the time or the
alarm.
Install battery as follow:
1. Remove battery compartment
door (located at the bottom of
the radio) by applying thumb
pressure to the tab on battery
door and then lift the door
out and off the cabinet.
2. Insert 2 AA batteries
(included).
3. Replace the compartment door.
Note: we recommend that you
replace the batteries every year.
Power failure indicator
When external DC power is
interrupted (disconnected) for a
short period of time, both time
and alarm settings will change
(unless batteries are installed).
After external DC power is
restored (reconnected), the Digital
Display will blink to indicate that
power was interrupted and you
should readjust the time and
alarm settings.
Front view
Top view
To turn off the unit
(standby mode)
Universal dock for iPod®
(push to open or close)
To select radio, iPod or AUX mode
Display
To select random
playback mode
To select repeat
playback mode
To skip to the previous or next fi le,
to search backward or forward
To turn off the wake function momentarily,
to turn off the sleep funtion
Refer to “Sleep function”
Refer to “NAP function”
Press SET at the center to select adjusting the clock time,
wake time 1 or wake time 2. Rotate the knob to adjust
the clock time, wake time 1 or wake time 2.
To select the
radio frequency
To select the
radio band
Side views
Bottom view
To adjust
the volume
Time zone selector (refer to “Clock”)
Battery compartment
(refer to “Battery back-up operation”)
Battery compartment lock
Power jack for AC/DC adapter (10 V 1.4 A)
Auto clock set
You do not have to set the clock
time as a built-in automatic time
set system is equipped in this clock
powered by 3V (2 AA batteries,
included and installed). All you
have to do is to plug this clock for
power and current time will be
shown automatically after setting
the time zone and daylight saving
time (read below).
However, the batteries can also
be exhausted and we recommend
that you replace the batteries
every year.
Setting time zone
Slide the time zone selector at
the bottom of the unit to Eastern,
Central, Mountain or Pacifi c time
zone (refer to the maps on the
right).
Daylight saving time
Press and hold DAYLIGHT
SAVING TIME button on the
bottom of the unit to turn on/ off
in areas observing/ not observing
such time change. The icon
shows on the display when
daylight saving time is active.
WARNING: Avoid playing with
these buttons when setting clock
or wake time.
Setting clock
In case the memory holding
batteries are accidentally
removed, set the clock manually
as below:
1. Press SET on the top of the
unit until the clock setting icon
fl ashes on the display.
2. Rotate the knob on the top
of the unit to set the clock
time. The time decrements or
increments follows by a faster
rate when you rotate and hold
the knob. The clock setting
icon fl ashes when you are
setting the time. AM or PM
icon also shows beside the
time.
3. To save and exit the clock
setting, wait for about 5
seconds or press SET until the
clock setting
, WAKE 1 or
WAKE 2 icon is off. The clock
time is now set.
Display brightness
Press BRIGHTNESS to dim the
display and press again to restore
to the original brightness level.
When the display is dimmed, the
blue indicator on the universal
dock for iPod will also be turned
off.
Listening to the radio
1. Press RADIO on the front of
the unit to turn on the radio.
2. Slide BAND to select the radio
band. The selected radio band
shows on the display.
3. Rotate TUNING to select
frequency. The selected
frequency shows on the
display.
4. Press OFF to turn off the radio.
Built-in AFC
The Built-in Automatic Frequency
Control (AFC) works only on FM.
It helps reducing drift on FM
reception and keeping the radio
locked in on the FM station to
which it is tuned.
When tuning in FM stations, you
may notice that the station you
are tuning can be well-tuned on
two or three nearby points on the
dial. Always tune carefully at the
loudest and clearest point.
AM Antenna
A built-in ferrite rod antenna
eliminates the need for an outside
antenna for AM reception.
Rotating the unit slightly may
improve reception of distant AM
stations.
Connecting your iPod
1. Push the universal dock for
iPod on the front of the unit
to open it.
2. Eight adapters are supplied.
Check the table on the right
and use the appropriate
adapter for your iPod.
3. Place the adapter and then
your iPod on the universal
dock for iPod.
4. Press iPod on the front of the
unit to select the iPod mode.
5. Playback from the iPod starts
automatically.
Adapters
Made for:
• iPod with video (30GB, 60GB,
80GB) 5th generation
• iPod photo (20GB U2 Special
Edition, 30GB U2 Special
Edition, 40GB, 60GB) 4th
generation
• iPod (20GB, 20GB U2 Special
Edition, 40GB) 4th generation
• iPod nano (2GB, 4GB, 8G) 1st,
2nd & 3rd generations
• iPod mini (4GB, 6GB) 1st &
2nd generations
• iPod touch
• iPod classic
* For the latest iPod models,
please use the adapter provided
with your iPod.
iPod
Listening to iPod
1. During playback, press iPod to
pause the playback and press
again to resume.
2. Press
/ to skip to the
previous or next fi le. Press and
hold / to search backward
or forward.
3. Press SHUFFLE to play the fi les
in random order in the iPod.
Random playback indication
shows on the iPod when the
function is activated. Press
again to cancel the function.
4. Press REPEAT to select a
repeat playback mode (repeat
1 or repeat all). Repeat
playback indication shows on
the iPod when the function is
activated. Press REPEAT until
no repeat playback indication
shows on the iPod to cancel
the repeat playback.
Note:
• You may charge the battery
of your iPod through the
universal dock for iPod while
the unit is turned off (standby
mode) or in the iPod mode.
Charging control should be
operated on the iPod.
• If no iPod is connected in the
iPod mode, the unit will exit
the iPod mode and turn off
automatically.
Set the wake time
This unit allows 2 wake times to
be set.
1. Press SET on the top of the
unit until the icon WAKE1 or
WAKE2 fl ashes on the display.
2. Rotate the knob on the top
of the unit to set the wake
time. The time decrements or
increments follows by a faster
rate when you rotate and hold
the knob.
3. To save and exit the wake
time setting, wait for about 5
seconds or press SET until the
clock setting
, WAKE 1 or
WAKE 2 icon is off. The wake
1 or wake 2 time is now set.
• To check the wake time after
setting, press SET until the
icon WAKE1 or WAKE2 fl ashes
and the respective assigned
wake time shows on the
display.
Select the wake source
You may be woken up by the
alarm, radio, or music from iPod.
1. Set a wake time (refer to the
above instructions).
2. Press WAKE 1 or WAKE
2 to select a wake mode.
Corresponding icon lights on
the front of the unit.
1
– Wake time 1 by alarm
1 – Wake time 1 by radio
1
– Wake time 1 by iPod
2
– Wake time 2 by alarm
2 – Wake time 2 by radio
2
– Wake time 2 by iPod
Waking to Alarm (
)
Note:
• The unit equips with GRAD-U-
WAKE feature, the alarm tone
volume will increase gradually
to its maximum in about 30 to
45 seconds.
• If you set the wake function
with low volume level before
going to bed, we advise using
Waking to Alarm mode to
wake you up since the volume
will automatically increase.
• When the AC power is
disconnected, all wake mode
will be reverted to alarm
tone.
When the wake
function activates, the
corresponding wake
icon will fl ash until the
wake function is turned off. The
icon will then stop fl ashing and
keep lighting up.
SmartSnooze
TM
This operation allows extra sleep
time after the wake function is on.
The alarm will be off by pressing
SNOOZE, SLEEP or NAP until
the snooze period is over. Snooze
function can be used repeatedly
up to 2 hours. After this, the wake
function will turn off until the
next day.
Set the “quiet” period as follow:
While pressing SNOOZE, rotate
the knob on the top of the unit to
set the “quiet” period from 1 to
30 minutes (default: 9 minutes).
Release SNOOZE, then the
“quiet” period is set.
Turn off the wake
function
• Silence the wake function
momentarily:
Press SNOOZE. The alarm
will sound again when the
snooze period is over. (refer to
“SmartSnoozeTM”).
OR
• Stop the wake function:
Press OFF. The alarm will be
on again the following day at
the same time.
OR
• Disable the wake function
permanently:
Press WAKE 1 or WAKE
2 repeatedly until no
corresponding wake indicator
(e.g. ) shows on the
display.
NAP function
Sleep function
In the sleep mode, the radio,
iPod or AUX mode turns off
automatically. To set the sleep
time, simply:
1. Press SLEEP repeatedly to cycle
among the sleep time available
(90min, 60min, 30min, 15min
and OFF. 90min is the default
setting).
• If necessary, press / to
further set the sleep time.
Each press of the button
will decrease or increase one
minute. For example, to set
35 min, press SLEEP to select
30min and then press 5
times.
• The icon fl ashes while
selecting.
2. When the desired sleep time
is selected, release SLEEP and
wait for about 5 seconds, the
sleep time is now set. The
radio (default) turns on and
the icon lights on the
display.
OR
• If the iPod is selected in your
last sleep function setting, the
iPod will start to play, instead
of the radio. The radio will
For catnaps up to 2 hours without
disturbing the regular alarm
settings, the NAP function wakes
you up after a short period of
time. Simply:
1. Press NAP repeatedly to cycle
among the NAP time available
(10min, 20min, 30min, 60min,
90min, 120min and OFF. 20min
is the default setting).
• If necessary, press
/ to
further set the NAP time.
Each press of the button
will decrease or increase one
minute. For example, to set
35min, press NAP to select 30
min and then press
5 times.
• The icon NAP fl ashes while
selecting.
2. When the desired NAP time is
selected, release NAP and wait
for about 5 seconds, the NAP
time is now set. The current
time shows and the icon NAP
lights on the display.
3. Press NAP once to show briefl y
the NAP time left.
• Only alarm tone can be
selected in the NAP mode.
• Press OFF to stop the NAP
alarm, OR press and hold
NAP until “OFF” is selected to
cancel the NAP function.
Audiovox Electronics Corp.
150 Marcus Blvd, Hauppauge,
NY 11788
©2009 Audiovox Electronics Corp.
Trademark(s) ® Registered
Marque(s) ® Deposée(s)
Marca(s) ® Registrada(s)
www.rcaaudiovideo.com
Printed in China
Important Battery Precautions
• Any battery may present a risk of
fi re, explosion, or chemical burn
if abused. Do not try to charge a
battery that is not intended to be
recharged, do not incinerate, and
do not puncture.
• Non-rechargeable batteries, such as
alkaline batteries, may leak if left in
your product for a long period of
time. Remove the batteries from the
product if you are not going to use
it for a month or more.
• If your product uses more than one
battery, do not mix types and make
sure they are inserted correctly.
Mixing types or inserting incorrectly
may cause them to leak.
• Discard any leaky or deformed
battery immediately. They may
cause skin burns or other personal
injury.
• Please help to protect the
environment by recycling or
disposing of batteries according to
federal, state, and local regulations.
Daylight saving time
button (refer to “Clock”)
To select the
display brightness
AUX input jack
1. Connect your auxiliary source
(e.g. mp3 player) to the AUX
input jack on the top of the
unit with an audio cable (not
supplied).
2. Press AUX to turn on the unit
or to switch to listen to AUX
from other modes. The AUX
indicator on the front will turn
on.
Auxiliary source
• Adjust the auxiliary player to
mid-range volume and adjust
the master volume on the unit.
Do not turn the volume of the
auxiliary player too high as this
may affect the sound quality.
For other playback operations,
control them on your auxiliary
player.
To activate
Wake 1 settings
and changes
Wake 1 mode
To activate
Wake 2 settings
and changes
Wake 2 mode
]
SEE MARKING ON BOTTOM OF PRODUCT
Warranty information
12 Month Limited Warranty
Applies to RCA Audio/Video Products
• AUDIOVOX ELECTRONICS CORP.
(the Company) warrants to the
original retail purchaser of this
product that should this product
or any part thereof, under normal
use and conditions, be proven
defective in material or workmanship
within 12 months from the date
of original purchase, such defect(s)
will be repaired or replaced with
reconditioned product (at the
Company’s option) without charge
for parts and repair labor.
• To obtain repair or replacement
within the terms of this Warranty,
the product is to be delivered with
proof of warranty coverage (e.g.
dated bill of sale), specifi cation of
defect(s), transportation prepaid, to
the Company at the address shown
below.
• This Warranty does not extend to the
elimination of externally generated
static or noise, to correction of
antenna problems, loss/interruptions
of broadcast or internet service,
to costs incurred for installation,
removal or reinstallation of product,
to corruptions caused by computer
viruses, spyware or other malware,
to loss of media, fi les, data or
content, or to damage to tapes, discs,
removable memory devices or cards,
speakers, accessories, computers,
computer peripherals, other media
players, home networks or vehicle
electrical systems.
• This Warranty does not apply to any
product or part thereof which, in the
opinion of the Company, has suffered
or been damaged through alteration,
improper installation, mishandling,
misuse, neglect, accident, or by
removal or defacement of the factory
serial number/bar code label(s).
THE EXTENT OF THE COMPANY’S
LIABILITY UNDER THIS WARRANTY
IS LIMITED TO THE REPAIR OR
REPLACEMENT PROVIDED ABOVE
AND, IN NO EVENT, SHALL THE
COMPANY’S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY PURCHASER
FOR THE PRODUCT.
• This Warranty is in lieu of all other
express warranties or liabilities. ANY
IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF
MERCHANTABILITY, SHALL BE
LIMITED TO THE DURATION OF THIS
WRITTEN WARRANTY. ANY ACTION
FOR BREACH OF ANY WARRANTY
HEREUNDER INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY
MUST BE BROUGHT WITHIN A PERIOD
OF 24 MONTHS FROM DATE OF
ORIGINAL PURCHASE. IN NO CASE
SHALL THE COMPANY BE LIABLE FOR
ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR
ANY OTHER WARRANTY. No person
or representative is authorized
to assume for the Company any
liability other than expressed herein
in connection with the sale of this
product.
• Some states do not allow limitations
on how long an implied warranty
lasts or the exclusion or limitation
of incidental or consequential
damage so the above limitations or
exclusions may not apply to you.
This Warranty gives you specifi c
legal rights and you may also have
other rights which vary from state
to state.
How to make a warranty claim:
• If your product is capable of storing
content (such as an mp3 player,
digital voice recorder, etc), it is
recommended to make periodic
backup copies of content stored
on the product. If applicable,
before shipping a product, make
a back up copy of content or data
stored on the device. Also, it is
advisable to remove any personal
content which you would not want
exposed to others. IT IS LIKELY
THAT CONTENTS AND DATA ON
THE DEVICE WILL BE LOST DURING
SERVICE AND REFORMATTING.
AUDIOVOX ACCEPTS NO LIABILITY
FOR LOST CONTENT OR DATA,
OR FOR THE SECURITY OF ANY
PERSONAL CONTENT OR DATA ON
THE RETURNED DEVICE. Product
will be returned with factory
default settings, and without any
pre-loaded content which may have
been installed in the originally
purchased products. Consumer will
be responsible for reloading data
and content. Consumer will be
responsible to restore any personal
preference settings.
• Properly pack your unit. Include
any remotes, memory cards, cables,
etc. which were originally provided
with the product. However DO NOT
return any removable batteries,
even if batteries were included
with the original purchase. We
recommend using the original
carton and packing materials.
• Include evidence of purchase date
such as the bill of sale. Also print
your name and address and a
description of the defect. Send via
standard UPS or its equivalent to:
Audiovox Electronics Corp.
Attn: Service Department.
150 Marcus Blvd.
Hauppauge N.Y. 11788
1-877-833-3491
• Insure your shipment for loss or
damage. Audiovox accepts no
liability in case of damage or loss en
route to Audiovox.
• Pay any charges billed to you by
the Exchange Center for service not
covered by the warranty.
• A new or refurbished unit will be
shipped to you freight prepaid.
What we will do:
Provide you with a new, or at our
option, a refurbished unit. The
exchange unit is under warranty for
the remainder of the original product’s
warranty period.
For Canada Customers, please ship
to:
Audiovox Return Centre
c/o Genco
6685 Kennedy Road,
Unit#3, Door 16,
Mississuaga, Ontario
L5T 3A5
IMPORTADOR PARA MEXICO:
Audiovox Mexico, S. de R.L. de
C.V.
Ejercito Nacional 436 Piso 3
Col. Chapultepec Morales C.P.
11570
Mexico, D.F.
AME0712174Y4
EXPORTADOR:
Audiovox Electronics Corp
150 Marcus Blvd, Hauppauge,
NY11788.
Maufacturer/Responsible Party
Audiovox Electronics Corp.
150 Marcus Blvd., Hauppauge,
NY 11788
IMPORTADOR PARA MEXICO:
Audiovox Mexico, S. de R.L. de C.V.
Ejercito Nacional 436 Piso 3
Col. Chapultepec Morales C.P. 11570
Mexico, D.F.
AME0712174Y4