Filter
Top Products
3
7. 3 IN 1 CARD SLOT
Slot for inserting 3 IN 1 card. The contacts of the card must point downwards. The unit cannot
read cards with a capacity of more than 4GB. The unit is not compatible to SDHC cards and only
supports the MP3 format.
8. OUT BUTTON (LOOP BUTTON)
When you press this button, you set the end point of the seamless loop and you start the loop. To
finish the loop, press again this button.
9. SEARCH BUTTON
Press this button to switch the single and continues play mode.The select mode is indicated on the
LCD.In SINGLE mode, after each track,the unit pauses the beginning of the next track in
continues mode,the unit plays all tracks
10. RELOOP BUTTON(LOOP SYSTEM)
This button is used to start the last saved loop. To finish the loop, press the reloop button.
11. PITCH BEND +/- BUTTON
When each to two CD player is playing the pitch bend function allows the button beat when mixing
from one song to anther.
12. CUE BUTTON
Pressing the CUE button during play provides a return to the position at which play was started.
13. PITCH BUTTON
Press the button to forward 10 tracks.If you FWD 10 tracks and exceed the total tracks the unit will
jump to track 1.
14. PLAY / PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from
pause to play.
15. PITCH CONTROL
Use this control slider to increase or decrease the speed playback.
16. DISPLAY
LCD Display Indicate the Track/Numbers//Time/Remain/Pitch/Continue/Single.
17. USB PORT
Support USB playing and you may also connect the computer with the USB cable but only when
enter into USB work mode.
18. USB/SD
Selector switch USB/SD for selecting a storage media in pause or cue mode. The LEDs will. verify
which storage media is active