We aplologize for the following errors in the Operating Instructions. Please note the following corrections.
Correction
CorrectionCorrection
Correction
Operating Instructions Errata
DDJ-S1
Serato DJ Edition
Correction
CorrectionCorrection
Correction
Rotary selector Rotary selector
The cursor in the library or on the [
The cursor in the library or on the [
The cursor moves between the [
] panel and library each time
The cursor moves between the [
] panel and library each time
the rotary selector is pressed.
the rotary selector is pressed.
If there are sub crates in the item currently selected in the [
If there are sub crates in the item currently selected in the [
4 4
] panel moves to a lower layer.
The function of expanding and collapsing crates with sub crates
] panel moves to the next category.
cannot be controlled from this unit with Serato DJ Ver.1.2.
] panel moves to a lower layer.
] panel moves to the next category.
The panel display switches each time the button is pressed.
→
→→
→
→
→→
→
→
→→
→
→
→→
→
→
→→
→
The panel display switches each time the button is pressed.
→
→→
→
→
→→
→
→
→→
→
→
→→
→
→
→→
→
LOOP SELECT (GRID LOCK) button
LOOP SELECT (GRID LOCK) button
5 5
LOOP SELECT (GRID LOCK) button
LOOP SELECT (GRID LOCK) button
The loop slot switches. (Loop Slot)
The loop slot switches. (Loop Slot)
When loops are stored in loop slots ahead of time, they can be called
When loops are stored in loop slots ahead of time, they can be called
Up to eight loops can be set in the loop slots.
Up to eight loops can be set in the loop slots.
When you select the number of the loop slot at which you want
When you select the number of the loop slot at which you want
to store the loop then set a loop, the loop is automatically stored.
to store the loop then set a loop, the loop is automatically stored.
When a new loop is set after a loop has been stored, the loop is
When a new loop is set after a loop has been stored, the loop is
overwritten and the slot is updated.
overwritten and the slot is updated.
When the number of the loop slot whose loop you want to call
When the number of the loop slot whose loop you want to call
button is pressed (reloop),
10
5 5
button is pressed (reloop),
] button (reloop), playback of the stored
playback of the stored loop starts.
Sets so that the entire beat grid cannot be edited.
Sets so that the entire beat grid cannot be edited.
For instructions on displaying the beat grid, see the Serato DJ soft-
For instructions on displaying the beat grid, see the Serato DJ soft-
Crossfader curve selector switch Crossfader curve selector switch
This switches the crossfader curve characteristics.
This switches the crossfader curve characteristics.
[ ]: Set here for a curve that rises steeply. (When the crossfader
] is selected for the crossfader curve.
12 12
[ ]: Set here for a curve that rises steeply. (When the crossfader
] is selected for the crossfader curve.
moves away from either the left or right edge, the sound is immedi-
［
］
is selected for the crossfader curve.
ately output from the opposite side.)
]: Choose this when you do not want to use the crossfader.
[ ]: Set here for a curve that rises steeply.
Crossfader settings are also needed on the application by
]: Choose this when you do not want to use the crossfader.
turning the dials to set slow or fast as well as switching the
curves on the controller.
→
→→
→
→
→→
→
]. The default value is set to [
12
