Filter
Top Products
PROGRAMING TRACK NUMBERS
1
Press
9
to stop the playback.
2
Press PROG to enter the programming mode.
™
The current album number flashes.
3
Press ¡1 / 2™
to select a desired album number
.
4
Press PROG to confirm.
™
The current track number flashes.
5
Press ¡1 / 2™
to select a desired track number
.
6
Press PROG to confirm.
7
Repeat steps 3-6 to select and store all desired tracks.
8
To start playback of your programme, press
2;
.
Helpful hints:
– Up to 999 playable audio files stored on a USB mass storage device can be
played on DC200.
– Up to 99 playable albums stored on a USB mass storage device can be select-
ed and displayed on DC200.
–Make sure that file names of MP3 files end with .mp3. and the file names of
WMA files end with .wma.
– For DRM protected WMA files, use Windows Media Player 10 (or later) for
conversion. Visit www.microsoft.com for details about Windows Media
Player and WM DRM (Windows Media Digital Rights Management).
– For USB device playing, if the display shows "OL", it means that the USB
device is electrically overloading DC200. You need to change a USB device.
SLEEP
This set has a built-in sleep timer, which enables the radio to be automatically
switched off after a preset period of time.
Setting and switching off SLEEP
1
Set your timer by pressing
SLEEP
repeatedly until the desired timer option appears.
™
Selections are follows (time in minute):
120=90=60=30=15=OFF=120
2
The set will turn off automatically at the selected time.
3
To cancel sleep, press either:
–
POWER
–
SLEEP
once or more until
OFF
appears on the display.
DC200_79_CCR 2008.2.21 17:01 Page 12