Filter
Top Products
Setting Alarm
You can set the alarm time and select the
alarm sound between Tuner and Buzzer.
1 Press CLOCK.
2 Press SETUP.
Set Alarm is highlighted.
3 Press SELECT.
The set enters alarm setup mode.
4 Press DOWN to highlight Alarm Time.
5 Press SELECT.
The set enters alarm setup mode.
6 Press HOUR+ or UP, DOWN repeatedly
or hold them until the desired hour is
displayed.
7 Press MIN+, or UP, DOWN repeatedly
or hold them until the desired minute is
displayed.
8 Press BACK to exit alarm time setup.
9 Press DOWN to highlight Wake to….
10 Press SELECT.
Tuner and Buzzer are displayed on the
second display.
11 Press UP or DOWN repeatedly or hold
them to select the desired alarm sound.
12 Press SELECT to save setting and exit.
Helpful hints:
You can enter alarm setting quickly by pressing
and holding ALARM on the set.
➜
➜
➜
➜
–
Setting radio tuner
1 Press CLOCK.
2 Press SETUP.
3 Press DOWN repeatedly to highlight Radio
Tuner.
4 Press SELECT.
The set automatically scans FM stations
and stores up to 15 preset stations.
5 Press BACK to stop scanning.
➜
Setup - Alarm Setup-Tuner
AJL305_05_CCR.indd 7AJL305_05_CCR.indd 7 2008-01-24 2:04:35 PM2008-01-24 2:04:35 PM