Philips 006 MP3 Player User Manual


 
13
USB power supply
Preparing your KEY player
Your player is powered by a built-in rechargeable battery (NiMH), which you
can charge direct from your computer.
TIP:
When you use the player for the very first time, fully charge up the built-in battery first!
(See next chapter)
For speed and as a convenient power back-up,you can also use the supplied AAA battery
box.
Charging the built-in battery via USB
1 Detach the USB cover.
2 Turn on your Computer.
3 Check that you have adjusted the function
switch to the OFF/ CHARGE position.
4 Connect the player’s USB port to the USB
port of your computer.
Charging starts immediately.While charging
the indicator lights up green.
Make sure you leave your PC switched on
during charging.
When the battery is fully charged (approx. 5
hours),the green indicator goes out.
5 Unplug the player and replace the USB
cover.
TIP:
OFF / CHARGE:During battery charging,you cannot playback music on the
player.The normal functions on the remote control are also disabled.
When you detach the USB cover, keep it in a safe place.
To avoid damaging the USB port, always fit the USB cover back on the player
when not connecting to your computer or the battery box.
KEY003-6-ENG 9/3/03 12:11 PM Page 13