Filter
Top Products
SP
™
2X
SPECIFICATIONS
Frequency response, 1 meter
on-axis, swept-sine in anechoic
environment:
53 Hz — 16 kHz (±3 dB)
Usable low frequency limit
(-10 dB point):
44 Hz
Power handling:
Full Range:
500 W continuous
1,000 W program
2,000 W peak
Low Frequency Section:
500 W continuous
1,000 W program
2,000 W peak
High Frequency Section:
60 W continuous
120 W program
240 W peak
Sound pressure level, 1 Watt,
1 meter in anechoic environment:
Full Range:
98.0 dB SPL, (2.83 V input)
Low Frequency Section:
99.0 dB SPL, (2.83 V input)
High Frequency Section:
107.0 dB SPL, (2.83 V input)
Maximum sound pressure level
(1 meter):
Full Range:
125.0 dB SPL continuous
131.0 dB SPL peak
Low Frequency Section:
126.0 dB SPL continuous
132.0 dB SPL peak
High Frequency Section:
124.8 dB SPL continuous
130.8 dB SPL peak
Transducer complement:
Low Frequency Section:
1x 15 in. woofer, vented
1508-8 HE BWX
High Frequency Section:
1x .875 in. exit/51 mm voice coil
compression driver on CD horn
Rx22
™
on a CH
®
-941
Box tuning frequency:
Low Frequency Section:
53 Hz
Harmonic distortion:
1% rated power
2nd Harmonic:
100 Hz: 1.62%
1 kHz: 0.22%
3rd Harmonic:
100 Hz: 0.52%
1 kHz: 0.63%
10% rated power
2nd Harmonic:
100 Hz: 5.09%
1 kHz: 0.81%
3rd Harmonic:
100 Hz: 1.97%
1 kHz: 0.92%
Crossover frequency (internal
passive):
Low Frequency — High Frequency:
1,600 Hz
Recommended active crossover
frequency region and slope:
Low Frequency — High Frequency:
1,600 Hz at 18 dB/octave
Time offset:
Low frequency: 0.00 ms
High frequency: 0.65 ms
Impedance (Z):
Full Range:
Nominal: 8.0 Ω
Minimum: 7.2 Ω
Low Frequency:
Nominal: 8.0 Ω
Minimum: 6.1 Ω
High Frequency:
Nominal: 8.0 Ω
Minimum: 6.0 Ω
SPECS
PEAVEY ELECTRONICS