Filter
Top Products
SP
™
112MX
SPECIFICATIONS
Frequency response, 1 meter
on-axis, swept-sine in anechoic
environment:
120 Hz — 14 kHz (±3 dB)
Usable low frequency limit
(-10 dB point):
73 Hz
Power handling:
Full Range:
500 W continuous
1,000 W program
2,000 W peak
Low Frequency Section:
500 W continuous
1,000 W program
2,000 W peak
High Frequency Section:
60 W continuous
120 W program
240 W peak
Sound pressure level, 1 Watt,
1 meter in anechoic environment:
Full Range:
100.0 dB SPL, (2.83 V input)
Low Frequency Section:
100.0 dB SPL, (2.83 V input)
High Frequency Section:
106.0 dB SPL, (2.83 V input)
Maximum sound pressure level
(1 meter):
Full Range:
125.0 dB SPL continuous
131.0 dB SPL peak
Low Frequency Section:
126.0 dB SPL continuous
132.0 dB SPL peak
High Frequency Section:
123.8 dB SPL continuous
129.8 dB SPL peak
Transducer complement:
Low Frequency Section:
1x 12 in. woofer, sealed
1208 SPS-8 BWX
High Frequency Section:
1x .875 in. exit/51 mm voice coil
compression driver on CD horn
RX
™
22 on a CH
®
-3
Harmonic distortion:
1% rated power
2nd Harmonic:
100 Hz: 1.66%
1 kHz: 0.49%
3rd Harmonic:
100 Hz: 0.63%
1 kHz: 0.44%
10% rated power
2nd Harmonic:
100 Hz: 4.05%
1 kHz: 2.13%
3rd Harmonic:
100 Hz: 2.67%
1 kHz: 0.52%
Crossover frequency (internal
passive):
Low Frequency — High Frequency:
1,350 Hz
Recommended active crossover
frequency region and slope:
Low Frequency — High Frequency:
1,600 Hz at 18 dB/octave
Time offset:
Low Frequency: 0.00 ms
High Frequency: 0.27 ms
Impedance (Z):
Full Range:
Nominal: 8.0 Ω
Minimum: 6.2 Ω
Low Frequency:
Nominal: 8.0 Ω
Minimum: 6.9 Ω
High Frequency:
Nominal: 8.0 Ω
Minimum: 7.1 Ω
Input connections:
2x 1/4 in. phone jack and 1x Neutrik
®
NL4 Speakon
®
(biamp)
SPECS
PEAVEY ELECTRONICS