Filter
Top Products
51
For Your Information
(Continued on next page.)
Insert a card.
There is no data on the card or in the folder.
An error has occurred during HDD/PC Card
initialization. Turn power off, then reinsert the
card. If error is repeated, format the card (p. 23)
and reinsert it. If error persists, card may be
damaged.
An error occurred during formatting of the card. Re-
insert the card and then reformat it. (pp. 22, 23)
There are no JPEG or TIFF files in the folder that
can be displayed.
Insufficient free space on the copy destination disk.
Delete unnecessary files, or insert a card with
sufficient free space.
Secure data files (audio files that include copyright
restrictions) cannot be copied.
Indications Condition
TV Mode (TV Screen Display)
Connect the AC adaptor.
Selection cannot be changed between a PC Card
HDD/PC Card and an SD Memory Card during
data transfer between the unit and a PC. Wait for
transfer to finish, then make your selection.
Insert the battery.
Data transmission was interrupted. Disconnect the
USB cable. Check that the battery and AC adaptor
are connected correctly, then reconnect the USB
cable.
The mode is being changed. Please wait a moment.
After processing is finished, the power will turn off.
The HDD SAFETY Detection Switch has activated
and the HDD has stopped for protection. Place the
unit on a flat, level surface.
Indications Condition
PC Mode (Liquid Crystal Display)
CONNECT AC
CANNOT
CHANGE SLOT
INSERT BATT.
DISCONNECT USB
PULL OUT USB CABLE
MODE CHANGE
PLEASE WAIT
POWER OFF
PLEASE WAIT
SAFETY MODE
PUT IT DOWN
NO CARD
NO DATA
INITIALIZE ERROR
FORMAT ERROR
NO IMAGE FILE
NO CAPACITY
COPIED EXCEPT
SECURE FILES
Warning and Instruction Displays
PT1.p50-56.p65 2003/01/14, 12:3751