Filter
Top Products
50
Warning and Instruction Displays
Indications Condition
Copy Mode (Liquid Crystal Display)
Insert battery. Power will not turn on without battery
inserted.
Insert the card.
No data is stored on the card.
An error has occurred during initialization of the
HDD/PC Card. Turn off the power, then reinsert the
card. If error occurs again, format the card (p. 23),
then reinsert it. If error still occurs, card may be
damaged.
An error occurred during card formatting.
Re-insert card and format again. (pp. 22, 23)
Insufficient free space on the copy destination disk.
Delete unnecessary files, or insert a card with
sufficient free space.
The card is protected. Cancel the protection to
resume operation. Refer to documentation provided
with the card.
An error occurred during copying. Press any key,
then reset the unit (p. 52), or turn the power off,
then back on again and repeat copying operation.
The HDD SAFETY Detection Switch has activated
and the HDD has stopped for protection. Place the
unit on a flat, level surface.
SD Memory Cards formatted to FAT32 specifications
cannot be used. “Format?” will be displayed. Transfer
desired files to PC, then format the card. (pp. 22, 23)
Secure data files (audio files that include copyright
restrictions) cannot be copied.
The battery is spent. Copy operation will stop and
power will turn off. Recharge the battery.
The battery is spent. The copy operation will be
canceled and the power will turn off. Then recharge
the battery.
The PC Card cannot be formatted.
PLEASE
INSERT BATT.
NO CARD
NO DATA
NO CAPACITY
CARD PROTECT
COPY ERROR
HIT ANY KEY
SAFETY MODE
PUT IT DOWN
INIT ERROR
FORMAT ERROR
CAN’T USE
FAT32 SDCARD
CAN’T COPY
SECURE FILES
BATTERY LOW
COPY CANCEL
BATTERY LOW
PC CARD
CAN’T FORMAT
PT1.p50-56.p65 2003/01/14, 12:3750