Filter
Top Products
30
RQT8157
Playing recorded video contents/Playing play-only discs
Refer to the control reference on page 28.
(continued)
Press [AUDIO].
[HDD] [RAM] [-RW‹VR›] [VCD]
LR>L>R
^---------------}
[DVD-V] [DVD-A]
You can change the audio channel number each time you press the
button. This allows you to change things like the soundtrack
language (➡ 34, Soundtrack).
[Note]
You cannot change the audio type in the following cases.
≥When a DVD-R, DVD-RW (DVD-Video format) or +R disc is in the disc tray while DVD drive is selected.
≥When the recording mode is XP and “Audio Mode for XP Recording” is set to “LPCM” (➡ 54).
≥When “Rec for High Speed dubbing” is set to “On” (➡ 22).
Operations during play
Displaying the television
image as a picture-in-
picture
[HDD] [RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
Press [TIME SLIP].
The unit displays the television image as a picture-
in-picture.
≥You will hear the playback audio.
≥Press [TIME SLIP] again to cancel.
≥Time Slip does not work when the unit’s “TV
System” settings are different from the title
recorded.
Skipping the specified
time (Time Slip)
[HDD] [RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
1 Press [TIME SLIP].
2 Press [3, 4] to select the time and press [ENTER].
Play skips the specified time.
≥Each time you press [3, 4], the time increases [3] or decreases [4] by
1 minute intervals. (Press and hold for 10-minute intervals.)
≥Press [TIME SLIP] to show the play images in full.
[Note]
Time Slip does not work while timer recording is in standby.
Manual Skip
[HDD] [RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
Press [MANUAL SKIP].
Each time you press, play restarts approximately 30 seconds later.
Simple editing operations during play
0 min
PLAY
ARD
Play images
Current receiving images
≥You can change the channel being
received by pressing [WXCH].
(You cannot change the channel being
received while recording.)
-
5 min
PLAY
ARD
Erase
[HDD] [RAM] [-R] [-RW‹V›] [+R]
Erase titles etc. during play
1 Press [ERASE].
2 Press [2, 1] to select “Erase” and press [ENTER].
≥A title cannot be restored once it is erased. Make certain before proceeding.
≥You cannot erase while recording or transferring (dubbing)
≥[-R] [+R] Available space does not increase after erasing.
≥[-RW‹V›] Disc space increases only when the last recorded title is erased.
Create Chapter
(➡ 36, Title/Chapter)
[HDD] [RAM]
Press [CREATE CHAPTER].
Chapters are divided at the point pressed.
≥Press [:, 9] to skip to the start of a chapter.
Changing audio during play
PLAY
L R
HDD
e.g., “L R” is selected
Soundtrack
1 ENG Î Digital 3/2.1ch
e.g., English is selected.
Playing recorded video contents/Playing play-only discs
EH50GN.book Page 30 Friday, March 4, 2005 2:36 PM