Filter
Top Products
DVD FUNCTIONS
EN
–
17
–
1
Press [SUBTITLE] during playback.
2
Press [s / B] to set subtitle to “OFF”.
1
Press [SUBTITLE] during playback.
Each time you press [SUBTITLE], subtitle language
changes as example below.
To cancel subtitle
1.ENG/6
OFF
Note:
• If your language is not shown after pressing [SUBTITLE] several
times, the disc may not have that language. However, some
discs have the subtitle language setting on the disc menu.
(Operation varies depending on the discs, so refer to the manual
along with the disc.)
• When “NOT AVAILABLE” appears on the TV screen, it means no
subtitle is recorded on the scene.
• If you choose a language that has a 3-letter language code,
the code will be displayed every time you change the subtitle
language setting. If you choose any other languages, ‘---’ will be
displayed instead. Refer to page 25.
• Some discs will only allow you to change the subtitle from the
disc menu. Refer to the manual accompanying the discs for
details.
OFF
(no subtitles)
ENG
(English subtitles)
FRE
(French subtitles)
...
1.ENG/6
Subtitle Language
This unit allows you to select a subtitle language (if available)
during DVD playback.
SUBTITLE
PLAY
SUBTITLE
PLAY
ENTER
Special Settings
e.g.) DVD
1
Press [MODE] once.
2
Using [K / L] to select desired track.
Press [ENTER].
• Up to 99 tracks can be programmed.
• If eight or more tracks were in a program, use
[SKIP H, G] to see all the tracks.
• While an MP3 or JPEG folder is open:
– Press [B] when you want to go to the next hierarchy.
– Press [s] when you want to go back to the previous
hierarchy (except for the top hierarchy).
3
Press [PLAY B] to start programmed playback.
CD-DA TOTAL 0:00:00
ENTER
CD-DA TOTAL 1:03:30
2/3
1 3:30
5 5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
ENTER
Note:
• Press [CLEAR] at step 2 to erase the most recently entered
track.
• To erase all programmed tracks at once, select “ALL CLEAR’’
and press [ENTER] at step 2.
• While a program is being played back, [STOP C] works as
follows;
- Press [STOP C] and [PLAY B] next, so that the
programmed playback restarts. (CD playback restarts from
the current point. MP3 or JPEG playback restarts from the
beginning of the current file.)
- Press [STOP C] twice and [PLAY B] next, so that playback
restarts from the first track in the original order. However,
your programmed playback can be restarted when you
follow the above steps. (Your programs are still stored until
either the disc tray is open or power is turned off.)
• To repeat the current track in the program, press [REPEAT]
repeatedly until
“
TRACK’’
appears during playback.
• To repeat the entire program, press [REPEAT] repeatedly until
“
ALL’’ appears during playback.
• Programmed playback of MP3 or JPEG is not available while
“DUAL PLAYBACK” is “ON“.
PLAY
Programmed Playback
You may determine the order in which tracks will play back.
e.g.) CD
STOP
MODE
ENTER
ENTER
E6E23UD_DP170SL9.indd 17E6E23UD_DP170SL9.indd 17 2008/03/19 13:58:342008/03/19 13:58:34