Meyer Sound UPM-2 Portable Speaker User Manual


  Open as PDF
of 4
 
Operating Instructions
Meyer Sound Laboratories, Inc.
2832 San Pablo Avenue
Berkeley, CA 94702
UPM-2
Reinforcement
Loudspeaker
The Meyer Sound UPM-2 is an ultra compact, high-
powered loudspeaker designed for sound reinforce-
ment applications where minimum loudspeaker size
is desired. The system consists of two 5-inch low-
frequency cone drivers in a vented enclosure with a
constant-directivity high-frequency horn and 1" tita-
nium dome driver. The enclosure contains a 3-way
passive crossover and is fitted with
3
⁄8"-16 threaded
mounting points on both sides and at each end. An
optional steel mounting bracket is available.
The UPM-2 is designed to operate as a system with
the Meyer Sound P-2 Control Electronics Unit. The
P-2 contains frequency response alignment circuitry
optimized for the UPM-2, and Meyer Sound exclusive
SpeakerSense™ driver protection circuitry, incorpo-
rating both peak and RMS signal limiting.
next