LG Electronics 22LQ630H Handheld TV User Manual


 
62
206-4207
OPTION
Enter
Move
Reference: TV Zone Restrictions
Close
1
Language
Caption : Off
Power Indicator
Set ID : 1
Demo Mode : Off
• Zone : 1
Eject
The FTG Channel Map Editor in the FTG File Manager’s FTG Channel Map Conguration Utility enables
you to assign Zone restrictions to individual channels that may be prohibited or deemed unsuitable for cer-
tain locations, for example, a hospital lobby. In the FTG Channel Map Editor, one or more Zone restrictions
(1–8) may be placed on each channel that is to be restricted. For example, if you wish to restrict a channel
from Zones 2 and 4, select both “Zone 2” and “Zone 4” in the Zone Restriction section of the FTG Channel
Map Editor screen when dening or editing that channel.
On location, set the Zone # in all the TVs in a select area, or “Zone,” so that the TVs can omit channels that
have been restricted in the FTG Channel Map. However, note that while a channel can be restricted from
up to eight Zones, a TV can only ever be in (set for) one Zone. TV Zone 0 is the default TV Zone #. When
the TV Zone # is set to 0, the TV will ignore any Zone restrictions (1–8) that may be placed on channels in
the FTG Channel Map. However, when the TV Zone # is set to 1, during conguration, the TV will omit any
channels that have been restricted from Zone 1 in the FTG Channel Map.
See the FTG Channel Map Editor overview on page 52. Also, see the Free-To-Guest (FTG) File Manager
User Guide for further information on assigning Zone restrictions.
Use the following procedure to set a Zone # in the TV. Note that the procedure below can only be performed
while the TV is in Pass-through Mode.
1. Turn ON the TV.
2. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the OPTION
menu option. Then, press OK (Enter).
3. Use the Up/Down arrows to select Zone, and then press OK (Enter).
4. In the Zone pop-up window, you can set the Zone #, which allows the TV to omit channels that have
been restricted in the FTG Channel Map. Use the Left/Right arrow keys to select the Zone # (1–8) for
this TV. Then, press OK (Enter).
5. Press MENU to return to TV viewing.