LG Electronics 22LQ630H Handheld TV User Manual


 
36
206-4207
USB Cloning Procedures (Cont.)
USB Cloning Notes
Read the IMPORTANT CLONING INFORMATION on page 33 before beginning
any cloning procedures.
You may edit a lename as part of the Learning procedure; however, a le with
edited contents will not be recognized.
It is not possible to clone a Master TV’s clock using a USB memory device.
Either set a Target TV’s clock manually or use the Auto Clock setting in the TV
setup menus.
Learn Setup from Master TV
1. Ensure the Master TV is set up completely and in Pass-through Mode.
2. Insert the USB memory device into the USB IN port on the Master TV.
3. Press MENU on the Installer Remote to display the TV setup menus, use
the arrow navigation keys to select/highlight the Option menu icon, and then
press the number “7” key a total of seven times to display the USB Download
Menu.
4. To gain access to the “Learn From TV” option in the USB Download Menu, key
in the password used to access the Installer Menu (Example: Press 9-8-7-6).
5. Use the Up/Down arrow keys to select Learn From TV (TLL), and then press
OK (Enter).
6. To differentiate this .tll le from others, you can use the Up/Down arrow keys
to change the last ve digits of the lename. Press
OK (Enter) when you are ready to initiate Learning.
Learning status will be shown on a progress bar in a new window. When the
Learning process is complete, the USB Download Menu will reappear on the
screen.
7. When Learning is done, press CC on the Installer Remote to exit the USB
Download Menu, and remove the USB memory device from the Master TV.
Select the le name and press OK to start
xxLQ630H-UA00001.TLL
UPDATING...
Do not remove the USB from the port!
Do not unplug!
25%
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (TLX)
Learn From TV (TLL)
Learn From TV (TLX)
Learn From TV (TLL)
Learn From TV
!
Previous
CC
Enter
Previous
CC
Enter
Learning / Teaching a Master TV Setup using a USB Memory Device / .tll File