Filter
Top Products
25
Hawaii
FAR Fargo SAT San Antonio
HNL Honolulu
Nebraska Utah
Iowa
LNK Lincoln SLC Salt Lake City
DSM Des Moines SNY Sidney
V
irginia
DVN Davenport
New Hampshire
LYH Lynchburg
Idaho
CON Concord ORF Norfolk
BOI Boise
New Jersey
V
ermont
Illinois
TTN Trenton BTV Burlington
ORD Chicago
New Mexico Washington
SPI Springfield ABQ Albuquerque SEA Seattle
Indiana Nevada
SFF Spokane
EVV Evansville LAS Las Vegas
West Virginia
IND Indianapolis RNO Reno CRW Charleston
Kansas New York Wisconsin
DDC Dodge City BUF Buffalo GRB Green Bay
K32 Wichita JFK New York City LSE La Crosse
TOP Topeka SYR Syracuse
West Virginia
Ohio
CRW Charleston
CLE Cleveland
Wyoming
CMH Columbus CPR Casper
26
CANADA CITY LIST
Code City Code City Code City
ALB Cal
g
ar
y
OTT Ottawa QUE Quebec
VAN Vancouver WIN Winnipeg TOR Toronto
1. The city abbreviation starts flashing.
2. Use the CH/+ key to toggle through the 99 cities and select city closest to your
location.
3. Press the SET key to confirm selection and enter the Snooze Setting.
Note: to view the sunrise, sunset, sun duration of selected city, please see “ Sunrise,
Sunset, Sun duration” below.
SNOOZE SETTING:
The snooze time can be set from OFF to a maximum time of 30 minutes (default is 10
minutes):
flashing
27
1. Use the CH/+ key to set the snooze time. Each pressing of the key will increase
the snooze time by 5 minutes. The snooze can also be set OFF when the OFF
digit is being displayed.
2. Confirm with the SET key and enter the Temperature setting.
Note: If the snooze time has been set OFF, the snooze function will not be activated.
°F/°C TEMPERATURE UNIT SETTING
The temperature display can be selected to show temperature data in °F or °C (Default
°F):
1. Use the CH/+ key to toggle between °F or °C.
2. Confirm with the SET key and enter the Weather forecasting icon sensitivity
setting.
WEATHER FORECASTING ICON SENSITIVITY SETTING
For locations with rapid changes of weather conditions, the weather icons can be set to a
different level for faster display of weather conditions.
flashing
28
1. The current sensitivity value will start flashing
2. Use the CH/+ key to set the weather sensitivity level. There are 3 levels of setting:
1, 2 and 3; level 1 is the most sensitive setting for high humidity areas; level 3 is
the slowest recording setting for arid areas (default setting is 2).
3. Confirm with the SET key and exit the Manual settings.
SUNRISE, SUNSET AND SUN DURATION
To view Sunrise, Sunset and Sun Duration of selected city:
1. Press the SNOOZE key once to view the sunrise time.
2. Press a second time the SNOOZE key to view the sunset time.
3. Press a third time the SNOOZE key to view the sun duration.
flashing
flashing