Filter
Top Products
24
CONVENTIONAL OPERATION (Conventional Format)
TRANSMITTING
1 Select the desired group and channel using the
encoder and the Group or Channel keys.
2 Press the key programmed as Monitor to check
whether or not the channel is free.
• If the channel is busy, wait until it becomes free.
3 Press the PTT switch and speak into the
microphone. Release the PTT switch to receive.
•For best sound quality at the receiving station, hold the
microphone approximately 1.5 inches (3 ~ 4 cm) from
your mouth.
RECEIVING
1 Select the desired group and channel using the
encoder and the Group or Channel keys. (If the
Scan function has been programmed, you can switch
it ON or OFF as desired.)
2 When you hear a caller’s voice, readjust the volume
as necessary.