Filter
Top Products
32
EN
Kenwood Media Application
Knowledgesections
In case of difficulty
Player cannot be launched because the firmware of the built-in HDD of the player is destroyed.
Restore the firmware as described in [How to restore the firmware] below.
The firmware should be restored in the built-in HDD of the player.
Restore the firmware as described in [How to restore the firmware] below.
Player cannot be launched and
[NO SYSTEM FOUND ON HDD]
is displayed.
The built-in HDD of the player is
formatted. Is any setup required
after this?
Symptom
Remedy
1
Connection the PC and player.
✍ [Connection of the PC and player] 5
2
Launch the Explorer on the PC.
3
Open the folder in which [KWSYSTEM] is installed.
Select [Local Disk] \ [Program Files] \ [KENWOOD] \ [HD20GA7] and double-click on [BACKUP] to open the
folder in which the firmware is installed.
4
Copy the [KWSYSTEM] folder in the folder opened in step 3 to the player.
How to restore the firmware:
5
Disconnect the PC and player.
✍ [Disconnection of the PC and player] @