Open as PDF
JBL On Stage IIIP easy setup guide
Step 5. Place the appropriate iPod adapter onto JBL On Stage IIIP.
Place your iPod on the docking connector or connect the audio input
cable to the rear of the JBL On Stage IIIP. Connect the audio cable to
the audio source.
Step 4. Connect the power adapter
into the input marked on the rear
of the JBL On Stage IIIP; plug the
power adapter into a wall outlet or
Step 7. Adjust the volume using
(+) to increase and (–) to decrease.
Press both to mute the JBL On
Stage IIIP. Press either button to
Alkaline batteries are considered nonhazardous and can be disposed of with your regular household trash.
Rechargeable batteries (i.e., nickel cadmium, nickel metal-hydride, lithium and lithium-ion) are considered hazardous household materials and may pose an unnecessary health and safety risk. Unwanted materials should be disposed of in an
environmentally sound manner. Contact your local waste management ofﬁ cials for other information regarding the environmentally sound collection, recycling and disposal of used batteries.
DO NOT MIX BATTERY TYPES
DO NOT MIX CHARGED AND PARTIALLY CHARGED BATTERIES
BATTERIES WILL NOT RECHARGE WHILE IN JBL ON STAGE IIIP
Step 1. Unpack the JBL On Stage IIIP,
adapter, remote control, power
adapter and input cable. Read these
Step 2. Rotate the battery door to
the unlocked position to open the
Step 3. Place 6 AA batteries in the
Step 6. Press the Power button on
the back of the JBL On Stage IIIP.
A green LED will light when the
JBL On Stage IIIP system is on.
0042CSK - JBL On Stage IIIP UG v3.indd 50042CSK - JBL On Stage IIIP UG v3.indd 5 17/06/08 15:34:1417/06/08 15:34:14