JBL ON Stage Micro II MP3 Docking Station User Manual


 
6
Troubleshooting
Symptom Possible Problem Solution
No sound from the JBL On Stage
Micro II speaker system (continued)
The JBL On Stage Micro II has been
muted for more than 10 minutes in the
battery-only mode
Press the JBL On Stage Micro II Power button to turn the unit
back on. Press either (+) or (–) to unmute.
No sound, no LED
No audio signal has been received for
10 minutes and JBL On Stage Micro II
is in standby mode
Make sure audio signal is supplied through docked iPhone/iPod
or “Audio In” jack.
No power; green LED is not on Wall adapter is not plugged into the
JBL On Stage Micro II correctly
Wall adapter is not receiving AC power
Check the connection of the wall adapter.
Place the wall adapter in a known powered outlet. Test the outlet
with a lamp or other device.
Connect the JBL On Stage Micro II to a known audio source.
Test the audio source with headphones.