Filter
Top Products
–
34
–
EN
2C15
CHANGING THE CAMERA
ANGLE (Multi-Angle Pictures)
The DVD/VCR has a function which allows you to
select the desired camera angle.
1
Press the ANGLE Button during playback.
¡If the disc contains sequences recorded from differ-
ent camera angles, the angle icon ( ) will appear
at the top-right of the screen. You can change the
camera angle when the icon appears on the screen.
¡The camera angle cannot be changed if the disc does
not contain sequences recorded from different
camera angles.
2
Press the ANGLE Button while the angle
number is shown on the screen.
Notes
¡The screen display will disappear after about 5
seconds.
¡Current camera angle will be displayed when you
press the ANGLE Button at first.
DVD
Angle 1
Angle 2
Angle 8
ANGLE 1 / 8
ANGLE 2 / 8
ANGLE 8 / 8
The DVD/VCR has a function which allows you to
select the desired language for subtitles.
1 Press the SUBTITLE Button during playback,
and then press the SUBTITLE Button to
select the desired subtitle language.
¡The subtitle language can be changed if the subtitles
are recorded in multiple languages on the DVD
being played.
¡The subtitle language cannot be changed if the
subtitles are recorded in a single language on the
DVD being played.
¡Pressing the SUBTITLE Button cycles the subtitle
language from SUBTITLE 1, SUBTITLE 2 and all
the languages recorded.
¡Current subtitle mode will be displayed when you
press the SUBTITLE Button at first.
¡Press the SUBTITLE Button, and then press the cur-
sor (s/B) Button to set it to on or off.
DVD
Subtitle 1
Subtitle 2
OFF
SUBTITLE 1.ENG/6
SUBTITLE 2.FRE/6
SUBTITLE OFF
HELLO
Bon jour
CHANGING THE SUBTITLE
LANGUAGE
¡The subtitle language resets to the one which has
been selected in the setup mode, every time the
power is turned on or discs are replaced. If that
language is not available on a disc, a language
defined by the disc is selected.
¡It may take time to display the subtitles in the
selected language.
¡The screen display will disappear after about 5
seconds.
¡When “SUBTITLE NOT AVAILABLE” appears on-
screen, it means no subtitle is recorded on the scene.
Notes
¡For some Audio language, three dashes (---) may
appear instead of a three-letter abbreviation for the
language (ENG, FRE, etc.).
¡Some discs allow subtitle language setting on the
disc menu. (Operation varies between discs, so refer
to the manual accompanying the disc.)
¡If the desired language is not shown after pressing
the SUBTITLE Button several times, the disc does
not have subtitles in that language.
H9210UD(EN)-2 02.4.15 10:18 AM Page 34