Filter
Top Products
Switching off the sleep timer
1 For switching off the sleep timer before the set time, switch off device
with »ON/OFF« or press and hold down »SLEEP«.
– Display: »љ« and the remaining time stop glowing.
– The device switches off.
Setting the reminder timer
1 Activate the function with »NAP«.
– Display: »60« and »
NAP
« flash.
– The circular snooze LED flashes.
2 Confirm reminder time with »S« or »A« (in 10 minute intervals from
120 to 10 minutes) and confirm with »NAP«.
– Display: »
NAP
« the remaining time until the reminder, e.g. »36«.
– After the set time has expired, a signal tone sounds (for max. 90
minutes).
– Display: »00« flashes briefly and then stops with »
NAP
«.
3 To switch off the signal tone, press and hold down »NAP«.
Switch off reminder timer
1 To switch off the reminder timer before the set time, press »NAP« and
hold it down.
– Display: »
NAP
« and the remaining time until the reminder stop
glowing.
Operation with the projector
You can use the supplied projector to project the current time to the wall or
the ceiling.
1 Connect the projector cable to the socket » « (left side of the device).
– The light in the projector lights up.
2 Direct the body of the projector in the desired angle.
3 Set the focus of the projection by moving the lens holder.
– The current time can be seen on the wall or on the ceiling.
4 Switch the projector off and on by using »PROJECTOR«.
Note:
If you are not using the projector for longer periods of time, take it off
the device.
OPERATION __________________________________________
AL 1
ON
/
12:00
ENGLISH
31