Grundig SC 5304 DCF Clock Radio User Manual


 
26
All settings can be carried out in stand-by mode. The following sections
describe the settings for the first alarm programme »
ALARM
«. Repeat
this for the second alarm programme »
ALARM
«. When both alarm
times are activated, »
ALARM
ɷ«, the alarm time (e.g. »7:30«) and
the upcoming day of the week, to which the alarm setting applies appear in
the
display.
Radio alarm
1 Press »ON/OFF« to switch on the device.
2 Use »1/6 ... 5/10« to select the desired radio station.
– The requested radio station is played.
3 Set the desired maximum volume using »+ VOLUME –«.
4 Press »ON/OFF« to switch the device to stand-by mode.
5 To activate the first alarm programme, press and hold down »AL 1«.
– Display: e.g. »
ALARM
ɷ«, the alarm time (e.g. »6:00«) and
the next alarm day.
6 Press »AL 1« twice to set the programme.
– Display: »
ALARM
1 ɷ« flashes.
7 If necessary, select radio programme (»ɷ«) with »S« or »A«.
8 Press »s«.
– Display: The hours of the alarm time flash.
9 Press »S« or »A« briefly to set the hours step-by-step or hold
down to run through the hours quickly.
10 Press »s«.
– Display: The minutes of the alarm time flash.
11 Press »S« or »A« briefly to set the minutes step-by-step or hold
down to run through the minutes quickly.
12 Press »s«.
– Display: » « flashes.
13 Switch the alarm on Monday on or off with »S« or »A«.
– Display: »ON« or »OFF« appears and flashes.
14 Press »s«.
– Display: » « flashes.
15 Choose settings for all days of the week; to do so repeat steps 11 and
12 as often as necessary.
16 Press »AL 1« to confirm the settings.
– Display: »
ALARM
ɷ«, the alarm time (e.g. »7:00«) and the
next alarm day for the week.
1
TUE
MON
1
21
2
1
SETTINGS ______________________________________________