GoVideo DP 5050 Portable DVD Player User Manual


 
12
Before You Begin...
Connect the portable DVD player to a power
outlet and plug in headphones or listen to the
built-in speakers. You can also connect the player
to external equipment, such as a TV and/or audio
system. If you do this, remember to:
Turn on your TV and select the appropriate
video input.
Turn on your stereo or audio system and select
the appropriate audio input.
Slide the AV Out/AV In switch to the AV OUT
position.
Basic DVD Playback
1
Press POWER on.
2
Press OPEN to open the disc cover.
3
Hold the edge of the disc and place it in the
tray with the label side up.
• Press the disk onto the spindle in the center
of the tray.
4
Close the disc cover.
• The portable DVD player starts playback or
opens the DVD disc menu automatically.
• Proceed with steps 5 and 6 when a menu is
available on the disc.
5
Press /// or use the number
button(s) to select the desired chapter/title.
• To select a chapter/title, input the number;
e.g., press “1” for chapter 1, “10” for chapter
10, etc.
6
Press PLAY/SEL..
• The player starts playback of the selected
item.
DVD Playback
Viewing Disc Menus
Press MENU. The portable DVD player stops
playback, and then displays the menu screen.
When not in use...
When the portable DVD player is not in use,
remove the disc and press POWER to turn off the
player. Then close the display panel.
The disc continues to rotate while the menu
is displayed even after the player has finished
playing a particular disc. When no further
selections are to be played, be sure to press
the STOP button to clear the menu screen.
If the disc is placed in the tray upside down
(and it is a single sided disc), the “NO DISC”
message will appear.
For your reference:
When “ ” appears when a button is pressed,
it means that the corresponding function is
prohibited by the player.
Stopping Playback
Press STOP once to stop and hold playback
at the current position.
Press STOP
twice to stop and reset the disc
to the beginning.