Filter
Top Products
10
Basic TV Connections
You can connect the portable DVD player to a
standard television using the player’s Audio and
Video jacks.
1
Connect the supplied audio cable (mini-plug to
RCA stereo) from the Audio jack on the left side of
the player to the Audio Inputs on your television.
2
Connect the supplied video cable (mini-plug to
RCA video) from the Video jack on the left side of
the player to the Video Input on your television.
3
Slide the
AV Out/AV In
switch to the AV Out
position.
4
Set your TV to its appropriate Video input to view
the player.
Connections
Coaxial Out 1 - Phones - 2 VolumeAV InAV Out
P.Scan
Video AudioS-Video
AUDIO INVIDEO IN
Coaxial Out 1 - Phones - 2 VolumeAV InAV Out
P.Scan
Video AudioS-Video
Y Pb Pr
S-VIDEO IN
Enhanced Video Connections
For improved picture quality, you can connect the
portable DVD player to a TV equipped with S-Video or
Progressive Scan inputs. These connections require
special cables with mini-plug adapters (not included).
S-Video Connections
1
Connect an S-Video cable with mini-plug adapter
(not included) from the S-Video jack on the left
side of the player to the S-Video input on your
television.
2
Slide the
AV Out/AV In
switch to the AV Out
position.
3
Set the Video Output to S-Video in the player’s
Screen Setup menu (see page 23).
• You can also press the
Mode
button as a
shortcut to switch between S-Video and
Progressive Scan modes.
4
Set your TV to its S-Video input to view the player.
Progressive Scan/Component Video
Connections
1
Connect a Component Video cable with mini-
plug adapter (not included) from the P-Scan jack
on the left side of the player to the Progressive
Scan/Component Video inputs (Y, Pb, Pr) on your
television.
2
Slide the
AV Out/AV In
switch to the AV Out
position.
3
Set the Video Output to P-Scan in the player’s
Screen Setup menu (see page 23).
• You can also press the
Mode
button as a
shortcut to switch between S-Video and
Progressive Scan modes.
4
Set your TV to its Progressive Scan input to view
the player.