GE MG27006 Handheld TV User Manual


 
9
Using the Remote
Tour of the Remote
POWER When in TV mode, turns TV on and off. If in another device
mode (VCR, Laserdisc, Satellite, etc.) and programmed, will turn the
device on and off.
VCR1 Puts the remote in VCR mode.
VCR2•LD Puts the remote in VCR2 or LD mode.
SAT•CABLE Puts the remote in SATCABLE mode.
AUDIO Puts the remote in Audio mode.
TV Turns on the TV and puts the remote in TV mode. Also displays
channel information.
REW, PLAY, FF, REC, STOP, PAUSE If programmed, provides
transport control for some remote-controllable VCRs, Laserdisc players,
tape decks and CD players.
DISPLAY Brings up channel information. Also clears menus from the
screen.
SKIP Press once before changing channels and the TV will wait 30
seconds before returning you to the original channel. Press repeatedly to
add more time (each press adds another 30 seconds).
CHAN
or CHAN Scans up or down through the current channel list.
Press once to change the channel up or down; press and hold to continue
changing channels.
VOL – or VOL + Decreases or increases the TVs volume.
MUTE Reduces the TVs volume to its minimum level. Press again to
restore the volume.
PREV CH Returns you to the previous channel.
(0-9) Number Buttons Enters channel numbers and time settings
directly though the remote control. To enter a two-digit channel, press the
two digits. To enter a three-digit channel, press and hold the first digit,
then add the second two. Example: to tune to channel 123, press and hold
1, press 2, then press 3.
INPUT In TV mode, press to toggle through the available input sources
(Channel 3, Channel 4, etc.).
ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver
button in SATCABLE mode.
CLEAR Removes any menu or display from the screen and returns you
to TV viewing. Also clears the SKIP timer. For GE, RCA and PROSCAN
VCRs, this button also clears items from the VCR clock and timer
programs.
MENU•PROG Brings up the Main menu and selects highlighted items.
When in VCR mode, it functions as a PROGRAM button for GE, RCA and
PROSCAN VCRs.
RESET Resets picture quality controls to their original settings.
MOVE (Arrows) Used to point to different items in the menu system.
Also used to adjust the menu controls.
INPUT ANTENNA
SKIP
PREV CH
REC PAUSE
PLAY
STOP
REW FF
CLEAR
MENU
PROG
RESET
MOVE
MUTE
DISPLAY
1
456
32
798
0
V
C
R
2
L
D
A
U
D
I
O
VOL
CHAN
CHAN
VOL
P
O
W
E
R
V
C
R
1
ł
S
A
T
C
A
B
L
E
T
V
DISPLAY Button Functions
Press once to bring up the channel
marker.
Press twice to clear the screen.