Filter
Top Products
EGO 4000 PLUS OPERATION MANUAL
21
SETTING ALARM MODE
The default alarm mode is buzzer but this can
be changed to CD/MP3 alarm or radio alarm
as well.
Follow the steps below to change alarm mode:
1. Either press ALARM MODE button repeatedly
or press UP/DOWN buttons to find the
desired alarm mode combination.
2. Press SET button to save settings or just
release buttons to save settings.
3. The corresponding alarm icons will indicate
on the display.
• If buzzer is selected, “AL 1 BUZZER” or “AL 2
BUZZER 2” indicates.
• If CD/MP3/WMA Alarm mode is selected,
“AL1 ” or “AL 2 ” indicates.
• If Radio Alarm mode is selected, “AL 1
RADIO” or “AL 2 RADIO” indicates.
When the desired alarm mode indicator is
shown, stop pressing UP/DOWN buttons, and
wait for a few seconds, the alarm mode is set
automatically, and you can also press SET but-
ton to save it once you choose it .
VIEWING ALARM SETTING
Follow the steps below to view alarm settings
• Press ALARM 1/ALARM 2 button once, the
LCD display shows alarm 1 setting (include
alarm time and mode) for about 5 seconds
before resuming to the local time clock.
• Press ALARM 1/ALARM 2 button twice,
the LCD display shows alarm 2 for about
five seconds before resuming to the local
time clock.
• Press ALARM 1/ALARM 2 button repeatedly
to toggle between alarm 1 and alarm 2
settings.
SNOOZE MODE:
When alarm activates, you may press SNOOZE
button to postpone alarm for 5 minutes. While in
snooze mode, “SOONZE” indicator appears on
the LCD display.
20
OPERATING INSTRUCTIONS continued 7 OTHER FEATURES
BACKLIGHT
Pressing any of the buttons on the player illumi-
nates the LCD backlight for about 4 seconds.
SLEEP MODE
Sleep Mode allows you to set the player to auto-
matically shutoff in a pre-determined amount
of time while playing CD/MP3 disc or the radio.
Sleep Mode may be set for 15, 30, 45, 60, or 90
minutes. Follow the steps below to activate Sleep
Mode while the player is turned on:
1. Press SLEEP button once to initiate the
sleep mode, and “SLEEP IN 15 MINUTES”
is displayed.
2. Press UP/DOWN buttons or SLEEP button
repeatedly to choose the desired sleep time.
3. Press SET button to save the selected sleep
time, and “SLEEP” indicator appears on the
display.
NOTE:
After the player shuts off in Sleep Mode, the SLEEP indicator
disappears on the LCD.
DEACTIVATING SLEEP MODE:
1. Press SLEEP button repeatedly till the “SLEEP
OFF” indicator appears on the display.
2. Press SET button to cancel sleep setting.
“SLEEP” indicator disappears on the display.
BASS SETTINGS
This player has three different bass settings
for optimal listening. The three settings are Stereo,
TruBass, and SRS 3D. On the right side
of the player, slide the bass switch to either
TruBass or SRS 3D to experience enhanced bass
effects and determine the optimal listening level
for you. For the “normal” setting without
enhanced bass effects, place the switch in the
middle to select the Stereo setting.