Filter
Top Products
THE INTERNAL BATTERY
13
Charging the Battery
The battery must be charged before first use. Use the included
AC Adapter to charge the battery.
Connect the AC adapter to the DC IN 9V connector
on the unit as shown below. Connect the other end
into a standard electrical wall jack.
1
The BATTERY STATUS LED will glow red indicating that
charging is needed. When the BATTERY STATUS LED
turns green, the charging cycle has been completed.
12
Front Panel
BATTERY PACK LED
Rear Panel
DC IN 9V
!
!
Important
Recharge your battery pack only when the battery status
is less than 25%. Unnecessary charging will reduce the
battery pack service lifetime.
When the battery pack is being charged, the LED will glow
RED. After successfully charging the battery pack, the
LED will glow GREEN.
The time to charge the battery pack is normally 3.5 to 4.5
hours. Do not charge for more than 8 hours.
The battery may only be charged when the unit is OFF.