Filter
Top Products
video mode (NTSC/PAL) using a
switch on the back of JB-99.
JBManager program will not start Incorrect installation Reinstall JBManager program from the
in PC program disc. Be sure to have the latest
version of the program.
Incorrect JBManager version Be sure to have the correct version of
JBManager program (Windows 95, 98, ME
or Windows 2000, NT, XP).
“DLPortIO.dll was not found.” Incorrect JBManager version Be sure to install a correct version of JBManager
message from JBManager. program for your Windows. This message is
likely to appear when JBManager for Win 9x, ME
is installed in a PC with Windows 2000, NT, XP.
“CD-ROM drive not found” or Incorrect winaspi32.dll driver. For Windows 2000, NT, XP, go to
"Cannot find driver. Looking for . C:\Windows\System32 directory and check
system aspi” message from for winaspi32.dll file. If the file exists, then go to
JBManager program. C:\Program Files\Cavs\JBManager
and delete the file with the same name
wnaspi32.dll. If the file "wnaspi32.dll" does not
exist in C:\Windows\System32, then download
COMPELASPI.EXE
from our website
www.cavsusa.com into your PC and double click on
it to install. After the installation is complete, go
to C:\Program Files\Cavs\JBManager directory and
delete the file wnaspi32.dll. Having installed
COMPELASPI.EXE
, if the program JBManager
still gives out the error messages, then go
www.goldenhawk.com/download_body.htm
or
www.adaptec.com
for the latest WINASPI driver.
“JB-99 connection error” or Wrong cable. Check that the cable is 25 pin parallel port
“Time our error” message from FX cable.
JBManager program.
Bad connections. Check the connections to JB-99 and PC.
Parallel port occupied by other Close other programs in PC which
programs. may occupy the parallel port.
JB-99 not ready. Be sure to have JB-99 turned on and in
3. Capture CDG mode from the main menu.
Incorrect parallel port setting. Check the parallel port setting of PC to
be Normal or Bi-directional (not
uni-directional) in the PC CMOS setup.
“Disc is engaged by other programs” Can not access the disc in CD-ROM The disc is engaged by other Windows
message from JBManager program. drive. programs such as Media Player. Close
all other programs which may use
the CD-ROM drive.
Interrupted data transfer between PC Dirty or scratched disc. In transferring graphic data from JB-99
and JB-99. to PC, a dirty or scratched disc may
cause interruption of data transfer. Clean
the disc or use an alternate disc.
Windows is using the parallel port for Especially common among PCs
other tasks such as checking for a connected to laser printers, the
54