CAVS JB-99 MP3 Player User Manual


 
Warning: When the Overwrite existing data is set as Yes, downloading new song files will replace the existing
song files with same song numbers.
2.5 Press 2 to choose the songs in the DataCD to be downloaded. Press the song number of each song you wish
followed by a press of the PROG button. When the selection is complete, press Stop. Press 2 again if you
wish to change the selection to All songs in the DataCD.
Note: To select more than one song for download, each song number must be followed by a press of the PROG
button.
2.6 Press 3 to enter a new starting song number for download. Input the starting number and press the Stop
button.
2.7 Press the PLAY/SELECT button to begin downloading. After the download is completed, the screen will
return to:
<<<DOWNLOAD>>>
Insert the ‘SONG DATA CD-ROM’
into Tray 1. Then Close the Tray
and press ‘PLAY’
See also: OPEN,CLOSE,DISC,D/C
Press Stop, Stop and 1 to get back to the initial screen of the Jukebox Play mode.
2.8 To cancel or return to the System Setup mode during downloading, press the STOP/RETURN button.
Note: When the downloading is canceled, the song file in process will be deleted.
3. Set Disc Play mode (Continuous Play / Single Play)
In the System Setup, press 2 to change the setting between the Continuous Play mode and Single Play mode. In
the continuous play mode, songs in reservation or repeat will play continuously without stops. In a single play
mode, songs in reservation or repeat will play one at a time and stop for a press of the PLAY/SELCT button for
the next.
4. Set BACKGROUND VIDEO (BGV) Play mode
4.1 In System Setup, press 3 to change between the Internal and External BGV modes.
4.2 When Internal, press 4, 5, and 6 to set the disc types of disc1, disc2 and disc3 slots.
Example: If you will be using a Video CD in the disc1 slot as the source of internal BGV, set the type
of disc1 as VCD. The JB-99 will then search for the internal BGV source from the disc1 slot.
Otherwise, set the type of disc1 as OFF.
4.3 When External, connect the external video source to JB-99 as shown in the Section 6.4 of the Chapter 6.
HOW TO CONNECT.
Warning: When the BGV Play mode is set as External, the external video source must be connected and powered
on before starting JB-99.
48