Filter
Top Products
Notepad program will open with JBConfig.txt file ready for editing.
In the text of JBConfig.txt, look for [System] section.
Within the section, there will be a line:
ip=192.168.1.102; Server IP address
Substitute the IP address in the line with the IP address of JB-199 Server obtained before.
For example, if JB-199 Server IP address was 192.168.0.105, modify the line to:
ip=192.168.0.105; Server IP address
After the change has been made, press File button of Notepad program and select Save, and
close the file.
6
6. Restart JB-199 Client.
WARNING: For steps 2 thru 6, JB-199 Server must be turned on and connected to the
Router/Switch at all time.
7. Repeat above steps (1-6) for each JB-199 Client.
HOW TO SETUP JB-199 CLIENT