Filter
Top Products
AM255380_01_V.PDF October 22, 2001 21
Operating Your Wave
®
Radio
Setting the alarms
Note: There are two alarms indicated on the clock display as ALARM (primary) and ALARM 2
(secondary). You can set the wakeup time for either alarm with the radio on or off. The indica-
tor for the selected alarm flashes when setting time or mode. The ALARM 2 indicator contin-
ues flashing for 10 seconds after setting ALARM 2.
Function Control panel Remote control
To select which alarm to set – On the control panel, press and hold
Alarm Set. Press Alarm Mode to select ALARM or ALARM 2. The indicator
flashes for the alarm you are setting.
On the remote, press Time. Press Alarm to select ALARM 2 or to return
to ALARM. The indicator flashes for the alarm you are setting.
To set the alarm time – On the control panel, hold down Alarm Set and
press Tuning up ( ) or down ( ). The time display changes slowly at first,
then more quickly. Release Tuning to stop.
On the remote, press Time. Press Tuning up ( ) or down ( ). The time dis-
play changes slowly at first, then more quickly. Release Tuning to stop. Press
Time to return to the current time display.
To set the alarm mode – On the control panel, after selecting the alarm,
release Alarm Set and press Alarm Mode to select one of the following alarm
modes (Press Alarm on the remote):
For tone only, press until you see the indicator.
For radio only, press until you see the indicator.
For tone and radio, press until you see both indicators .
When the alarm tone sounds, press Sleep/Snooze to turn the radio on. Press
Sleep/Snooze to pause the radio for 10 minutes.
To cancel the alarm mode – Follow the directions for setting the alarm
mode. Press Alarm Mode (control panel) or Alarm (remote) until the
display shows no alarm mode indicators.
To check the alarm setting – On the control panel, press and hold
Alarm Set to see the ALARM wakeup time and the preset station. While hold-
ing Alarm Set, press Alarm Mode to see the ALARM 2 wakeup time and the
preset station.
On the remote, press Time to see the ALARM wakeup time. Press Alarm
to see the ALARM 2 wakeup time. Press Time again to return the dis-
play to the current time. ALARM 2 flashes for 10 seconds.
To wake to a preselected radio station – On the control panel,
ONLY, select ALARM or ALARM 2. Press and hold Alarm Set, and then press
one of the six station Presets buttons (you can change between AM and FM
if needed). To clear the preset, press and hold Alarm Set and press the but-
ton for that preset again.
Use the control panel to
select this feature.
Alarm Mode
Alarm
Set
Clock
Set
Volume
Presets
123
456
Tuning
Sleep/Snooze
AUX AM/FM
On/Off
Wave Radio
Time
Alarm
Sleep
Tuning
Station
Volume
Mute
AUX
AM
FM
On
Off
Wave Radio
1
23
4
5
6
Presets
Alarm
Set
Alarm Mode
Time
Tuning
Alarm
Set
Time
Alarm
Tuning
Sleep/Snooze
Alarm Mode
Sleep
Alarm Mode
Alarm
Set
Alarm Mode
Time
123
456
Presets
Alarm
Set