Filter
Top Products
14 October 22, 2001 AM255380_01_V.pdf
Setting Up Your Wave
®
Radio
Component Cable
Connection at
component
Connection at
Wave radio Notes
Portable CD or tape
player
One miniplug-to-stereo
audio cable
Headphone jack
For best sound, set
the player volume
control to approxi-
mately 3/4 of maxi-
mum volume.
AUX IN jacks
CD player, tape deck,
or VCR
One stereo audio cable Audio output jacks
If there are two sets
of outputs (fixed and
variable), use fixed so
that the volume can
be controlled from the
radio.
AUX IN jacks Recording from your Wave radio is
not recommended because con-
necting cables to the VARIABLE
OUT jacks shuts off the radio
speakers, preventing you from
monitoring the recording volume.
Television
Use a standard RCA
cable for a TV with stereo
output jacks.
Use a standard “Y”
adapter for a TV with a
single (mono) audio out-
put jack.
You may need a special
adapter (such as a
miniplug stereo audio
cable) for a TV with a
headphone outlet.
Audio output jacks
If there are two sets
of outputs (fixed and
variable), use fixed so
that the volume can
be controlled from the
radio.
AUX IN jacks To make sure the sound seems to
come from the screen, place the
Wave radio close to the TV.
Bose
®
Lifestyle
®
music system
Stereo cable with male-
to-male RCA plugs.
TAPE (REC) jacks AUX IN jacks
Powered speakers
with volume control
Use the audio input
cable that came with
your speakers.
Speaker system input
(as described in the
speaker owner’s
guide)
VARIABLE OUT jacks If your powered speaker audio
input cable has three connectors
on each end, use only the two
connectors that look alike to con-
nect to the Wave radio outputs.
DO NOT USE THE THIRD CON-
NECTOR.
Connecting powered speakers to
the VARIABLE OUT jacks shuts
off the radio speakers.
RL
AUX IN
RL
AUX IN
RL
AUX IN
®
RL
AUX IN
VARIABLE OUT