Filter
Top Products
Page 11
724-746-5500 | blackbox.com
Chapter 3: Preparing the Cabinet for Installation
CAUTION: Make sure that once fitted, the foam does not cover any of the
equipment’s vents.
Table 3-1. Quick fit soundproof blanking panels.
Rack Units Description Part Number
1U 1U high, 19" wide filler panel QCE-SPFP-1U
2U 2U high, 19" wide filler panel QCE-SPFP-2U
3U 3U high, 19" wide filler panel QCE-SPFP-3U
5U 4U high, 19" wide filler panel QCE-SPFP-5U
The cabling runs from the front 19" face to the rear of the cabinet via the top
and bottom of the left-hand and right-hand infills once installation is finished or
following any refits. Fill the resulting air gaps around the cabling with the supplied
infill foam (see Figure 3-3).
3.6 Cable Management
The QuietCab Elite is fitted with six cable entry positions, three on both the lid
and base, fitted to the rear and to each side of the cabinet (see Figure 3-1).
Gland plates
Gland plates
Figure 3-1. The cabinet has three cable entry points via removable gland plates
fitted to the top cover shown and three more fitted to the base.