Filter
Top Products
31
Installing the Battery Pack:
1. First, make sure the player is in “Stop” mode and that the AC power
supply has been disconnected.
2. Close the player cover.
3. Align the battery pack with the player module’s front edge.
4. Push the battery towards the rear of the player until it locks into
position. The lock position is indicated by a click. The unit will fit snugly
to the player.
5. Push the battery plug into the DVD player DC input jack.
Figure 40. Installing the DVD Player Battery
Removing the Battery Pack:
1. First, make sure the player is in “Stop” mode and the AC power
supply has been disconnected.
2. Press the release button on the rear of battery.
3. Slide the battery towards the back of the unit.
Figure 41. Removing the DVD Player Battery