Filter
Top Products
128-6476
22 of 28
- Momentarily press the PTT or Power button to confirm weather chan-
nel selection.
To exit the Weather standby mode, press and hold the MODE button for at
least 2 seconds; the weather alert icon disappears.
Weather Alert Mode
When the unit is in the weather standby mode and the weather alert is
active, when a weather alert signal is received, the unit will generate a
warning tone. The unit will then revert to the previously selected weather
channel for monitoring purposes.
To access the weather alert function:
- From Weather Band standby mode, press the MODE button twice to
access the weather alert function; the weather alert icon (
) and AL
On or oF appear flashing on the display.
- Press the Up or Down button briefly to select weather alert On or
oF as desired.
NOTE: When On is selected, and the PTT button is pressed to
confirm the weather alert mode, the alert icon will blink on
and off at 5-second intervals, indicating the weather alert
mode is active and is monitoring one of 10 weather
channels.
Handset Transceiver Battery Alert
When the battery icon ( ) blinks on the LCD panel, recharge unit or
install fresh batteries. If the batteries are not replaced the (
) icon will
appear and an audio tone will sound to warn the user that the batteries
must be replaced.
NOTES FOR GOOD COMMUNICATION
1.The GMRS-3000PK 22 channels are shared on a ‘take turns’ basis.
This means other groups may be talking on any of the channels. A
common code of ethics/courtesy is to switch to another vacant
channel and not to attempt to talk over someone who is already using
the channel you first selected.
22